Differences

This shows you the differences between two versions of the page.

--- products:sbc:edge2:hardware:interfaces [2022/09/19 05:35]
nick
+++ products:sbc:edge2:hardware:interfaces [2024/08/21 05:43] (current)
nick [Back side]
@@ Line 1: / Line 1: @@
 ====== Edge2 Interfaces ======
-{{/products:sbc:edge2:hardware:edge2-top.jpg?500 }}
+===== Top side =====
-{{/products:sbc:edge2:hardware:edge2-bot.jpg?500 }}
-{{/products:sbc:edge2:hardware:edge2-info.jpg?800}}
-<tabbox Front(Blue)>
+{{products:sbc:edge2:hardware:edge2-interfaces-top-side.webp?600|}}
-|    ^ Component             ^ Purpose  ^
-|1|USB-A|USB 3.0, blue colour|
-|2|USB-C|USB 3.1 && Disport Port|
-|3|HDMI|Type-A Female, up to 4K@60Hz, HDCP 2.3|
-|4|USB-C|Only for power delivery|
-|5|USB-A|USB 2.0, black colour|
-|6|RGB LED1|Status indicator LED|
-|7|RTC Battery |RTC battery for the real time clock|
-|8|Reset Button|Force reboot your Edge-V in the event of a system freeze|
-|9|Function Button|Press this 3 times in 2 seconds to enter MaskROM mode|
-|A|Power Button|This button turns on your Edge2|
-|B|Digital Microphone|Digital Microphone|
-|C|Camera3|30-pin, 0.5mm pitch, 4-lane, dual cameras, 16MP 30FPS image signal processing|
-|D|Camera3|30-pin, 0.5mm pitch, 4-lane, dual cameras, 16MP 30FPS image signal processing|
-|E|Camera3|30-pin, 0.5mm pitch, 4-lane, dual cameras, 16MP 30FPS image signal processing|
-|F|Digital Microphone|Digital Microphone|
-|G|G-Sensor|3-axis accelerometer|
-|H|MHF4 Antenna|Wi-Fi and Bluetooth antenna connector|
-|I|SPI Flash|Flash memory module that interfaces over SPI|
-|J|PWM Fan Header|4-wire fan header utilising pulse width modulation|
-|K|RGB LED1|Status indicator LED|
+|    ^ Component           ^ Purpose                                                                        ^
+| 1  | USB-A               | USB 3.1, blue colour                                                           |
+| 2  | USB-C               | USB 3.1 & Display Port                                                        |
+| 3  | HDMI                | Type-A Female, up to 8K@60Hz, HDCP 2.3                                         |
+| 4  | USB-C               | Only for power delivery                                                        |
+| 5  | USB-A               | USB 2.0, black colour                                                          |
+| 6  | RGB LED1            | Status indicator LED                                                           |
+| 7  | RTC Battery         | RTC battery for the real time clock                                            |
+| 8  | Reset Button        | Force reboot your Edge2                                                        |
+| 9  | Function Button     | Press this 3 times in 2 seconds to enter MaskROM mode                          |
+| A  | Power Button        | This button turns on your Edge2                                                |
+| B  | Digital Microphone  | Right digital microphone                                                       |
+| C  | Camera3             | 30-pin, 0.5mm pitch, 4-lane, dual cameras, 16MP 30FPS image signal processing  |
+| D  | Camera2             | 30-pin, 0.5mm pitch, 4-lane, dual cameras, 16MP 30FPS image signal processing  |
+| E  | Camera1             | 30-pin, 0.5mm pitch, 4-lane, dual cameras, 16MP 30FPS image signal processing  |
+| F  | Digital Microphone  | Left digital microphone                                                        |
+| G  | G-Sensor            | 3-axis accelerometer                                                           |
+| H  | MHF4 Antenna        | Wi-Fi and Bluetooth antenna connector                                          |
+| I  | SPI Flash           | Flash memory module that interfaces over SPI                                   |
+| J  | PWM Fan Header      | 4-wire fan header utilising pulse width modulation                             |
+| K  | RGB LED2            | Status indicator LED                                                           |
-<tabbox Back(Red)>
+===== Back side =====
+{{products:sbc:edge2:hardware:edge2-interfaces-back-side.webp?600|}}
 |    ^ Component             ^ Purpose  ^
-|1|Pogo Pin|Debug and USB hub pins|
+|1|Pogo pins|Debug and USB hub pads|
 |2|DSI2|30-pin, 0.5mm pitch, provided data path for dual|
 |3|DSI1|40-pin, 0.5mm pitch FPC connector for 4-lane 1080P displays && TP touch input|
 |4|IO2|30-pin, 0.5mm pitch,connect the expansion board|
 |5|IO1|30-pin, 0.5mm pitch, connect the expansion board|
-|6|XPWR Pads|Another way for entering upgrade mode|
+|6|XPWR pads|Extennal POWER key pads|
+===== Hardware buttons =====
+{{:products:sbc:edge2:hardware:edge2-buttons.webp?400|}}
+^  Reset  ^  Function  ^  Power  ^  Purpose                   ^
+|  x      |            |         | Force Reboot Edge-V        |
+|         |  x         |         | Enter Upgrade Mode (TST)   |
+|         |            |  x      | Power On/Wake Up Edge2     |
+|  x      |            |  x      | Enter Upgrade Mode (KEYS)  |
+==== Special button shortcuts ====
+  * Press ''FUNCTION'' 3 times in 2 seconds to enter ''MaskROM'' mode
+  * Boot [[OOWOW:]] - hold ''FUNCTION'' and short press ''RESET''
+  * Other [[software/oowow/user-manual#hardware-buttons|OOWOW button shortcuts]]
+==== GPIO header =====
-<tabbox Buttons>
+[[../applications/gpio/40pin-header]]
-^ Reset  ^ Function  ^ Power  ^ Purpose                   ^
-|x| | |Force Reboot Edge-V|
-| |x| |Enter Upgrade Mode (TST)|
-| | |x|Power On/Wake Up Edge2|
-|x| |x|Enter Upgrade Mode (KEYS)|
-</tabbox>

Khadas Docs

User Tools

Site Tools

Differences

Page Tools