Khadas Docs

Amazing Khadas, always amazes you!

User Tools

Site Tools


Sidebar

products:sbc:edge2:hardware:interfaces

Edge2 Interfaces

Top side

Component Purpose
1 USB-A USB 3.1, blue colour
2 USB-C USB 3.1 & Display Port
3 HDMI Type-A Female, up to 8K@60Hz, HDCP 2.3
4 USB-C Only for power delivery
5 USB-A USB 2.0, black colour
6 RGB LED1 Status indicator LED
7 RTC Battery RTC battery for the real time clock
8 Reset Button Force reboot your Edge2
9 Function Button Press this 3 times in 2 seconds to enter MaskROM mode
A Power Button This button turns on your Edge2
B Digital Microphone Right digital microphone
C Camera3 30-pin, 0.5mm pitch, 4-lane, dual cameras, 16MP 30FPS image signal processing
D Camera2 30-pin, 0.5mm pitch, 4-lane, dual cameras, 16MP 30FPS image signal processing
E Camera1 30-pin, 0.5mm pitch, 4-lane, dual cameras, 16MP 30FPS image signal processing
F Digital Microphone Left digital microphone
G G-Sensor 3-axis accelerometer
H MHF4 Antenna Wi-Fi and Bluetooth antenna connector
I SPI Flash Flash memory module that interfaces over SPI
J PWM Fan Header 4-wire fan header utilising pulse width modulation
K RGB LED2 Status indicator LED

Back side

Component Purpose
1Pogo pinsDebug and USB hub pads
2DSI230-pin, 0.5mm pitch, provided data path for dual
3DSI140-pin, 0.5mm pitch FPC connector for 4-lane 1080P displays && TP touch input
4IO230-pin, 0.5mm pitch,connect the expansion board
5IO130-pin, 0.5mm pitch, connect the expansion board
6XPWR padsExtennal POWER key pads

Hardware buttons

Reset Function Power Purpose
x Force Reboot Edge-V
x Enter Upgrade Mode (TST)
x Power On/Wake Up Edge2
x x Enter Upgrade Mode (KEYS)

Special button shortcuts

  • Press FUNCTION 3 times in 2 seconds to enter MaskROM mode
  • Boot OOWOW - hold FUNCTION and short press RESET

GPIO header

Last modified: 2024/08/21 05:43 by nick