This is an old revision of the document!
Edge2 have advanced and flexible booting sequence…
MCU ⇒ BROM ⇒ SPL ⇒ U-Boot ⇒ OS target
Next information actual for MCU ver: 0x0002
FUNCTION
+ RESET
- oowow mode POWER
+ RESET
- force boot from SD/eMMC.FUNCTION
x3 times - flash mode More detail: hardware-buttons
i2cget -f -y 2 0x18 0x20
bootmode | value |
---|---|
spi | 0 |
mmc | 1 |
i2cget -f -y 2 0x18 0x92
oowow_mode | value |
---|---|
disabled | 0 |
request | 1 |
activated | 2 |
passed | 3 |
rescue | 5 |
i2cset -f -y 2 0x18 0x91 value
oowow_mode | value |
---|---|
spi | 0 |
mmc | 1 |
default reboot | 2 |
At this moment all modes works same as spi
~# bootmode spi ~# bootmode mmc [i] /opt/bootmode spi -> mmc(sd) ~# bootmode mmc ~# bootmode spi [i] /opt/bootmode mmc -> spi
~# mcu_oowow_mode set 1 [i] set with 1 ~# mcu_oowow_mode clean [i] set with 0 ~# mcu_oowow_mode && echo activated 0x01 activated ~# mcu_oowow_mode clean [i] set with 0 ~# mcu_oowow_mode || echo disabled disabled ~# i2cset -f -y 2 0x18 0x92 1 ~# i2cget -f -y 2 0x18 0x92 0x01
Forced hardware reboot
~# mcu_reboot ~# i2cset -f -y 2 0x18 0x91 2
i2cset -f -y 2 0x18 0x92 1 i2cset -f -y 2 0x18 0x91 1
SPL boot loader priority: spi
⇒ emmc
⇒ sd
- hard-coded by MCU and BROM
SPL boot loader priority not same as mcu bootmode. MCU boot mode works only after SPL boot stage passed.
Boot mode mmc
logs:
U-Boot SPL board init U-Boot SPL 2017.09 (Sep 15 2022 - 14:38:28) MCU: bootmode: 1, oowow 3 MCU: oowow 0 board_boot_order: /chosen found, using spl_boot_device() !!! same-as-spl: !!! /mmc@fe2c0000: !!! /mmc@fe2e0000: !!! /spi@fe2b0000/flash@1: Trying to boot from MMC2 :: 0 Card did not respond to voltage select! mmc_init: -95, time 12 spl: mmc init failed with error: -95 Trying to boot from MMC1 :: 1 Trying fit image at 0x4000 sector
Boot mode spi
logs
U-Boot SPL board init U-Boot SPL 2017.09 (Sep 15 2022 - 14:38:28) MCU: bootmode: 0, oowow 3 MCU: oowow 0 board_boot_order: /chosen found, using spl_boot_device() !!! same-as-spl: board_spl_was_booted_from: brom_bootdevice_id 6 maps to '/spi@fe2b0000/flash@1' +++ /spi@fe2b0000/flash@1: !!! /mmc@fe2c0000: !!! /mmc@fe2e0000: !!! /spi@fe2b0000/flash@1: Trying to boot from MTD2 :: 0 Trying fit image at 0x300 sector
Boot OOWOW - hold FUNCTION
and short press RESET
then release FUNCTION
U-Boot SPL board init U-Boot SPL 2017.09 (Sep 15 2022 - 14:38:28) MCU: bootmode: 0, oowow 1 MCU: oowow 2 board_boot_order: /chosen found, using spl_boot_device() !!! same-as-spl: +++ /spi@fe2b0000/flash@1: !!! /mmc@fe2c0000: !!! /mmc@fe2e0000: !!! /spi@fe2b0000/flash@1: Trying to boot from MTD2 :: 0 Trying fit image at 0x300 sector
Boot SPL from eMMC:
U-Boot SPL board init U-Boot SPL 2017.09 (Oct 18 2022 - 20:45:10) Trying to boot from MMC2 Card did not respond to voltage select! mmc_init: -95, time 12 spl: mmc init failed with error: -95 Trying to boot from MMC1 spl: partition error Trying fit image at 0x4000 sector
Boot SPL from eMMC boot oowow u-boot from SD:
U-Boot SPL board init U-Boot SPL 2017.09 (Oct 18 2022 - 20:45:10) Trying to boot from MMC2 part_get_info_efi: *** ERROR: Invalid GPT *** ... spl: partition error Trying fit image at 0x4000 sector
SPI and eMMC boot loaders cleared. Boot SPL and oowow u-boot from SD
U-Boot SPL board init U-Boot SPL 2017.09 (Jul 25 2022 - 10:32:06) MCU: bootmode: 1, oowow 3 MCU: oowow 0 board_boot_order: /chosen found, using spl_boot_device() !!! same-as-spl: !!! /mmc@fe2c0000: !!! /mmc@fe2e0000: !!! /spi@fe2b0000/flash@1: Trying to boot from MMC2 :: 0 Trying fit image at 0x4000 sector
Boot SPL android u-boot from eMMC:
U-Boot SPL board init U-Boot SPL 2017.09-gc060f28d70-220414 #zyf (Apr 18 2022 - 18:13:34) Failed to set cpub01 Failed to set cpub23 Trying to boot from MMC2 MMC: no card present mmc_init: -123, time 0 spl: mmc init failed with error: -123 Trying to boot from MMC1 Trying fit image at 0x4000 sector
Current u-boot can start OS from USB
⇒ SD
⇒ eMMC
⇒ …
kedge2# printenv boot_targets
boot_targets=usb0 mmc1 mmc0 pxe dhcp fail
default eMMC u-boot log for Ubuntu images
kedge2# printenv boot_targets
boot_targets=usb0 mmc1 mmc0 pxe dhcp
0x000000000000-0x000000080000 : "bootloader" # 0x03f800 bytes x 2 > 0x000000 0x040000 < 0 0x000000080000-0x0000000a6000 : "bl2e" # 0x013000 bytes x 2 > 0x080000 0x093000 < 0x00040000 0x0000000a6000-0x0000000c8000 : "bl2x" # 0x011000 bytes x 2 > 0x0a6000 0x0b7000 < 0x00053000 0x0000000c8000-0x000000148000 : "ddrfip" # 0x040000 bytes x 2 > 0x0c8000 0x108000 < 0x00064000 0x000000148000-0x000000448000 : "devfip" # 0x275000 bytes > 0x148000 < 0x000a4000 0x000000448000-0x000000488000 : "env" # zero 0x000000488000-0x0000004c8000 : "dtb" # zero 0x0000004c8000-0x0000006c8000 : "boot" # zero 0x0000006c8000-0x000002000000 : "user" # zero