Khadas Docs

Amazing Khadas, always amazes you!

User Tools

Site Tools

Home / products / sbc / vim4 / install-os / install-os-into-emmc-via-usb-tool
products:sbc:vim4:install-os:install-os-into-emmc-via-usb-tool

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
products:sbc:vim4:install-os:install-os-into-emmc-via-usb-tool [2022/07/01 05:45]
nick 		products:sbc:vim4:install-os:install-os-into-emmc-via-usb-tool [2022/09/28 06:13]
nick
Line 1: Line 1:
-====== Install OS into eMMC ======+{{indexmenu_n>20}}
  
-All VIM series boards have **onboard eMMC storage**, so you can install the **OS** into the **eMMC** using the **USB upgrade tool**. 
  
-===== Install on Windows =====+====== VIM4 Install OS into eMMC via USB Flash Tool ====== 
 + 
 +===== Install on Windows PC =====
  
 ==== Preparation ==== ==== Preparation ====
Line 11: Line 12:
 ==== Install USB Drivers  ==== ==== Install USB Drivers  ====
    
-  - Goto directory ''V3\Driver'' and double click ''dpscat.exe'' to install.Please note there is no GUI display.+  - Goto directory ''V3\Driver'' and double click ''dpscat.exe'' to install. Please note there is no GUI display.
   - Goto directory ''V3\Driver'' and double click ''dpinst64.exe'' to install.   - Goto directory ''V3\Driver'' and double click ''dpinst64.exe'' to install.
  
-==== Flash Image ====+==== Install the OS ====
  
-  - Goto root directory double click ''Aml_Burn_Tool.exe'' to open the USB upgrade tool+  - Goto root directory double click ''Aml_Burn_Tool.exe'' to open the USB upgrade tool.
   - Click ''Setup-->Load Image'', then choose an [[dl>products/vim4/firmware/ | OS image]] for your board.   - Click ''Setup-->Load Image'', then choose an [[dl>products/vim4/firmware/ | OS image]] for your board.
   - Connect your board to your PC with a USB-C cable (the board will power on automatically).   - Connect your board to your PC with a USB-C cable (the board will power on automatically).
   - Put your board into [[boot-into-upgrade-mode | Upgrade Mode]].   - Put your board into [[boot-into-upgrade-mode | Upgrade Mode]].
-  - If you have performed steps 3 and 4 correctly, your PC will automatically discover your board as an attached USB-device. +  - If you have  correctlyperformed steps 3 and 4, your PC will automatically discover your board as an attached USB-device. 
-  - Now all you need to do is to click the ''Start'' button and wait for process to complete.+  - Now what you need to do is to click the ''Start'' button and wait for the process to complete.
  
-{{:products:sbc:vim4:install-os:usb-upgrade-tool-interface-en.png?800|}}+{{products:sbc:vim4:install-os:usb-upgrade-tool-interface-en.png?800|}}
  
  
-<note info>+<WRAP info>
  
-  * To interrupt flashing, click the ''Stop'' button, then close the USB Upgrade Tool. Note that the eMMC may already have been completely erased if you went past the 15% mark. +  * Click the ''Stop'' button to interrupt flashing, then close the USB Upgrade Tool. Note that the eMMC may have already been completely erased if you went past the 15% mark. 
-  * An [[extra-power-input | External Power Supply]] may be required in cases where your PC cannot provide enough electrical power for the burning process.+  * An [[products:sbc:vim4:hardware:external-power-supply | External Power Supply]] may be required when your PC cannot provide enough electrical power for the burning process.
   * If your system is a 32-bit system, please select ''dpinst32.exe'' when installing the driver.   * If your system is a 32-bit system, please select ''dpinst32.exe'' when installing the driver.
  
-</note>+</WRAP>
  
 +===== Install on Ubuntu PC =====
  
-===== Install on Ubuntu ===== +<WRAP important > 
- +Tools were only verified to function properly on Ubuntu. No guarantees were made for other Linux distributions! 
- +</WRAP>
-<note warn> +
- +
-Tools were verified to function properly on Ubuntu only, we make no guarantees for other Linux distributions! +
- +
-</note>+
  
 ==== Preparation ==== ==== Preparation ====
  
 +Install the dependencies.
  
-```bash+```shell
 $ sudo apt-get install libusb-dev git parted $ sudo apt-get install libusb-dev git parted
 ``` ```
  
-==== Download Burning Tool ====+==== Download the Tool ====
  
 +/*is on Khadas GitHub*/ [[kg>utils|Flash tools for Ubuntu/Linux]].
  
-Image burning tool for Ubuntu is in this repository [[https://github.com/khadas/utils | utils]]. +```shell
- +
-```bash+
 $ git clone https://github.com/khadas/utils $ git clone https://github.com/khadas/utils
 ``` ```
Line 62: Line 59:
 Or just pull it (if you have already cloned this repository). Or just pull it (if you have already cloned this repository).
  
-```bash+```shell
 $ cd /path/to/utils $ cd /path/to/utils
 $ git pull $ git pull
 ``` ```
  
-==== Install Burning Tool ==== +==== Install the Flash Tool ====
  
 You need to install USB rules and create some links. You need to install USB rules and create some links.
  
-```bash+```shell
 $ cd /path/to/utils $ cd /path/to/utils
 $ sudo ./INSTALL $ sudo ./INSTALL
Line 79: Line 75:
 You will see this print-out if it was successful. You will see this print-out if it was successful.
  
-```bash+```txt
 Installing Amlogic flash-tool... Installing Amlogic flash-tool...
  
Line 107: Line 103:
 Done! Done!
 ``` ```
-<WRAP info> 
  
 +<wrap important >
 Root privilege is required. Root privilege is required.
- +</wrap>
-</WRAP>+
  
 ==== Check the USB Driver ==== ==== Check the USB Driver ====
  
  
-You must now place your board into `Upgrade Mode`. See [how to enter upgrade mode](BootIntoUpgradeMode.html). +You must now [[boot-into-upgrade-mode| put your board into Upgrade Mode]].
-Check to see if Ubuntu has detected your board as an attached USB-device.+
  
-```bash+Check to see if Ubuntu has detected your board as an attached USB device. 
 + 
 +```shell
 $ lsusb | grep Amlogic $ lsusb | grep Amlogic
-BUS 002 Device 036: ID 1b8e:c003 Amlogic, Inc.+Bus 003 Device 073: ID 1b8e:c004 Amlogic, Inc. DNL
 ``` ```
 +
 The message above means that your board is connected and recogized by Ubuntu. The message above means that your board is connected and recogized by Ubuntu.
  
-==== Install the OS on Ubuntu ====+==== Install the OS ====
  
 +<tabbox VIM1> 
  
 +```shell
 +$ burn-tool -v aml -b VIM1 -i /path/to/image
 +```
  
-```bash +<tabbox VIM2>  
-$ aml-burn-tool -i /path/to/image+ 
 +```shell 
 +$ burn-tool -v aml -b VIM2 -i /path/to/image
 ``` ```
  
-You will see these teminal logs if successful.+<tabbox VIM3/3L> 
  
-```bash +```shell 
-Rebooting the board ........[OK] +$ burn-tool -v aml -b VIM3 -i /path/to/image
-Unpacking image [OK] +
-Initializing ddr ........[OK] +
-Running u-boot ........[OK] +
-Create partitions [OK] +
-Writing device tree [OK] +
-Writing bootloader [OK] +
-Wiping  data partition [OK] +
-Wiping  cache partition [OK] +
-Writing boot partition [OK] +
-Writing data partition [OK] +
-Writing logo partition [OK] +
-Writing system partition [OK] +
-Do you want to reset the board? y/n [n]? y +
-Resetting board [OK]+
 ``` ```
  
-```bash +<tabbox VIM4>  
-$ aml-burn-tool -b VIM4 -i /path/to/image+ 
 +```shell 
 +$ burn-tool -v aml -b VIM4 -i /path/to/image
 ``` ```
  
 +<tabbox VIM1S> 
  
-For more information please refer to [docs](https://github.com/khadas/utils/tree/master/aml-flash-tool/docs).+```shell 
 +$ burn-tool -v aml -b VIM1S -i /path/to/image 
 +``` 
 +</tabbox>
  
-==== Uninstall Burning Tool ====+You will see these teminal logs if successful.
  
 +```txt
 +Burning image 'vim4-ubuntu-22.04-server-linux-5.4-fenix-1.0.11-220620-emmc-develop.img' for 'VIM4' to eMMC...
 +next try index 3, current opt arg vim4-ubuntu-22.04-server-linux-5.4-fenix-1.0.11-220620-emmc-develop.img
 +MSG[TLS]pkg path vim4-ubuntu-22.04-server-linux-5.4-fenix-1.0.11-220620-emmc-develop.img
 +MSG[TLS]exe run path:/storage/code/git/utils/aml-flash-tool/tools/adnl
 +MSG[FLW]Aml_flow_init version V1.1-trunk Nov  1 2019!
 +MSG[FLW]Tooltype 3
 +DBG[FLW]ok in load lib AmlImagePack.so
 +MSG[FLW]OK leave Aml_flow_init
 +
 +...
 +
 +MSG[TLS][105660110991160c00000000]LMsg[usbFlw]cmd[oem mwrite 0x1cefb normal store _aml_dtb]
 +MSG[TLS][105660110991160c00000000]LMsg[usbFlw][MWrite] finsihed
 +MSG[TLS]UI:Verifying__aml_dtb
 +MSG[TLS][105660110991160c00000000]LMsg[usbFlw]cmd[oem verify sha1sum 799ab7772f6dc4d78d9612916910b589e63df481]
 +MSG[TLS]UI:Downloading_bootloader] %98..
 +MSG[TLS][105660110991160c00000000]LMsg[usbFlw]cmd[oem mwrite 0x319000 normal store bootloader]
 +MSG[TLS][105660110991160c00000000]LMsg[usbFlw][MWrite] finsihed
 +MSG[TLS]UI:Verifying_bootloader
 +MSG[TLS][105660110991160c00000000]LMsg[usbFlw]cmd[oem verify sha1sum f5ab1b260d5153161fed73a7baca58330c105863]
 +MSG[TLS][105660110991160c00000000]LMsg[usbFlw]cmd[oem save_setting]
 +MSG[TLS][105660110991160c00000000]burn successful^_^
 +Time elapsed: 3 minute(s).
 +Done!
  
-```bash 
-$ cd /path/to/utils 
-$ sudo ./UNINSTALL 
 ``` ```
  
 +For more information please refer to [[https://github.com/khadas/utils/tree/master/aml-flash-tool/docs|aml-flash-tool docs]].
  
-==== See Also ====+==== Uninstall the Flash Tool ====
  
-[boot-into-upgrade-mode| Boot into Upgrade Mode).+```shell 
 +$ cd /path/to/utils 
 +$ sudo ./UNINSTALL 
 +```
  
Last modified: 2023/06/05 09:29 by nick

Page Tools

Khadas Site

Khadas Community

Khadas GitHub

Khadas Downloads