Differences

This shows you the differences between two versions of the page.

--- products:sbc:vim3:install-os:install-os-into-emmc-via-usb-tool [2022/07/06 10:16]
127.0.0.1 external edit
+++ products:sbc:vim3:install-os:install-os-into-emmc-via-usb-tool [2023/03/23 03:31]
xiong [Preparation]
@@ Line 1: / Line 1: @@
-====== Install OS into eMMC via USB Tool ======
+{{indexmenu_n>10}}
+====== VIM3/3L Install OS into eMMC via USB Flash Tool ======
+All VIM series boards have onboard eMMC storage, so you can install the OS into the eMMC using the USB upgrade tool.
+===== Install on Windows PC =====
+==== Preparation ====
+.Download the [[dl>products/vim3/tool/usb_burning_tool_v2.2.0.zip|USB Burning Tool]] and extract it to somewhere.
+.Description of the USB Upgrade Tool’s directory contents:
+{{/products:sbc:vim3:install-os:usb-upgrade-tool-dir-1.png}}
+  * The V2 and V3 folders hold the original burning tool files
+  * The burn tool folder stores burning tools and drivers for different boards
+.Description of the burn tool directory contents:
+{{/products:sbc:vim3:install-os:usb-upgrade-tool-dir-2.png}}
+  * Driver-VIM1_2_3 Driver files for VIM1/VIM2/VIM3/VIM3L boards
+  * Driver-VIM4 Driver files for the VIM4 board
+  * VIM1_2_3.exe Burning tool for VIM1/VIM2/VIM3/VIM3L boards
+  * VIM4.exe Burning tool for the VIM4 board
+==== Install the Flash Tool ====
+Run ''setup_v2.x.x.exe'' to install the tool.
+==== Install the OS ====
+  * Open ''USB_Burning_tool_v2.x.x.exe'', click ''File''-->''Import Image'' to choose an [[dl>products/vim3/firmware/|OS image]] for your board.
+  * Connect your board to your PC with a USB-C data cable (the board will power on automatically).
+  * Put your board into [[/products/sbc/vim3/install-os/boot-into-upgrade-mode|Upgrade Mode]].
+  * If you have performed steps 2 and 3 correctly, your PC will automatically discover your board as an attached USB-device.
+  * Now all you need to do is to click the ''Start'' button and wait for burning to complete.
+{{/products:sbc:vim3:install-os:usb-upgrade-tool-interface-v217-en.png?800}}
+<WRAP info >
+  * To interrupt burning, click the Stop button, then close the USB Upgrade Tool. Note that the eMMC may already have been completely erased if you went past the 15% mark.
+  * An [[/products/sbc/vim3/hardware/external-power-supply|External Power Supply]] may be required in cases where your PC cannot provide enough electrical power for the burning process.
+</WRAP>
+===== Install on Ubuntu PC =====
+{{page>products/sbc/common/install-os/install-os-into-emmc-on-ubuntu&noheader}}

Khadas Docs

User Tools

Site Tools

Differences

Page Tools