products:sbc:vim1:install-os:install-os-into-emmc-on-windows

Table of Contents

VIM1 Install OS into eMMC on Windows
Discussion

VIM1 Install OS into eMMC on Windows

Introduction

This document mainly introduces how to use the burning tool to burn the system to Khadas SBC under Windows.

Preparation

Download the USB Burning Tool and extract it to somewhere.

Install

Run setup_v2.x.x.exe to install the tool.

Flash Image

Open USB_Burning_tool_v2.x.x.exe, click File–>Import Image to choose an OS image for your board.
Connect your board to your PC with a USB-C data cable (the board will power on automatically).
Put your board into Upgrade Mode.
If you have performed steps 2 and 3 correctly, your PC will automatically discover your board as an attached USB-device.
Now all you need to do is to click the Start button and wait for burning to complete.

To interrupt burning, click the Stop button, then close the USB Upgrade Tool. Note that the eMMC may already have been completely erased if you went past the 15% mark.
An External Power Supply may be required in cases where your PC cannot provide enough electrical power for the burning process.

Last modified: 2022/09/01 23:42 by frank

Khadas Community

Khadas Downloads