This shows you the differences between two versions of the page.
Both sides previous revision Previous revision Next revision | Previous revision | ||
products:sbc:edge1:hardware:interfaces [2023/03/22 03:38] nick |
products:sbc:edge1:hardware:interfaces [2023/03/22 04:03] (current) nick |
||
---|---|---|---|
Line 6: | Line 6: | ||
- | | ^ Component | + | | ^ Component |
- | |1|USB-A|USB 3.0, blue colour| | + | | 1 | USB-A | USB 3.0, blue colour |
- | |2|RJ-45|Gigabit Ethernet with Wake-On-LAN (WOL)| | + | | 2 | RJ-45 | Gigabit Ethernet with Wake-On-LAN (WOL) |
- | |3|HDMI|Type-A Female, up to 4K@60Hz, HDCP 2.2| | + | | 3 | HDMI |
- | |4|USB-C|USB 3.0, Display Port v1.2, can be used for upgrading the OS| | + | | 4 | USB-C | USB 3.0, Display Port v1.2, can be used for upgrading the OS | |
- | |5|USB-A|USB 2.0, black colour| | + | | 5 | USB-A | USB 2.0, black colour |
- | |6|Fan Header|4-wire fan header utilising pulse width modulation| | + | | 6 | Fan Header |
- | |7|Reset Button|Force reboot your Edge-V | + | | 7 | Reset Button |
- | |8|Function Button|Press this 3 times in 2 seconds to enter MaskROM mode| | + | | 8 | Function Button |
- | |9|Power Button|This button turns on your Edge-V| | + | | 9 | Power Button |
- | |A|RTC Battery Header|Header for attaching a battery for the real time clock| | + | | A | RTC Battery Header |
- | |B|40-Pin GPIO|access GPIO, or use it to add a Toneboard| | + | | B | M2 Hole | M2 clearance holes for a case, or adding a heatsink |
- | |C|Gesture Sensor|Control your Edge-V with a hand-wave| | + | | C |
- | |D|Infrared Module|2-channel infrared receiver for use with Khadas IR remote| | + | | D |
- | |E|LEDs|Status indicator LEDs| | + | | E |
- | |F|I-Pex Wi-Fi / Bluetooth Connector|Wi-Fi / BT Antenna connector| | + | | F |
- | |G|I-Pex Wi-Fi / Bluetooth Connector|Wi-Fi / BT Antenna connector| | + | | G | I-Pex Wi-Fi / Bluetooth Connector |
Line 31: | Line 31: | ||
- | | ^ Component | + | | ^ Component |
- | |1|Li-Po Battery Connector|Connect a Lithium Polymer battery with the [Juice Board](https:// | + | | 1 | USB-C | USB-C port that accepts 5-20V power input (PD only) | |
- | |2|USB-C|USB-C port that accepts 5-20V power input (USB power delivery)| | + | | 2 |
- | |3|Micro-SD Card Slot|Boot alternative OSes via a Micro-SD card, or just for extra storage| | + | | 3 |
- | |4|M.2 Socket (PCI-E 2.1)|Connect 2280 NVMe SSDS at 4-lane speed with M2X Extension| | + | | 4 |
- | |5|E-DP Display|For connecting to external displays via E-DP| | + | | 5 |
- | |6|M2x4 Mounting Point|For mounting to cases and heatsinks| | + | | 6 |
- | |7|Touch Panel|For accepting touch-input| | + | | 7 |
- | |8|MIPI-TX|MIPI-DSI header for connecting LCD screens| | + | | 8 |
- | |9|MIPI-RX|For connecting to MIPI-CSI cameras| | + | | 9 |
- | |A|MIPI-RX/TX|Configurable, | + | | A | Li-Po Battery Connector |
- | |B|M-Register|Another way for entering upgrade mode| | + | |
Line 50: | Line 49: | ||
- | ^ Reset ^ Function | + | ^ Reset ^ Function |
- | | x | | | Force Reboot Edge-V | + | | x | | | Force Reboot Edge-V |
- | | | + | | |
- | | | + | | |
- | | x | | x | Enter Upgrade Mode (KEYS) | | + | | x | | x | Enter Upgrade Mode (KEY) | |