Differences

This shows you the differences between two versions of the page.

--- products:sbc:edge1:development:linux:build-linux-uboot [2022/07/14 02:32]
frank
+++ products:sbc:edge1:development:linux:build-linux-uboot [2023/02/13 21:04]
nick
@@ Line 11: / Line 11: @@
 Choose your ''board'' (e.g. ''Edge''), ''U-Boot version'', ''Linux version'', ''system version'', etc.
-```sh
+```shell
 $ source setenv.sh
 ```
 Choose the correct version for your requirements.
-===== Build U-Boot =====
-Build U-Boot with a single command:
-```sh
-$ make uboot
-```
-The binaries are located in ''build/u-boot/fip/_tmp''. You'll need ''u-boot.bin.sd.bin'', ''u-boot.bin'', and ''u-boot.bin.spi.bin''.
-  * ''u-boot.bin.sd.bin'' - for flashing to the **SD card**
-  * ''u-boot.bin'' - for flashing to the **eMMC**
-  * ''u-boot.bin.spi.bin'' - for flashing to the **SPI Flash**
 ===== Build U-Boot Debian package =====
@@ Line 35: / Line 21: @@
 You can also choose the Debian U-Boot package:
-```sh
+```shell
 $ make uboot-deb
 ```
@@ Line 46: / Line 32: @@
 The folder location is ''build/images/debs/1.0.11/Edge'', and the Debian U-Boot package is ''linux-u-boot-xxx-xxx_xxx-xxx_arm64.deb''.
-  * SoC Vendor Debian U-Boot package: ''linux-u-boot-Edge-vendor_1.0.11-2017.09_arm64.deb''
+  * SoC Vendor Debian U-Boot package: ''linux-u-boot-edge-vendor_1.0.11-2017.09_arm64.deb''
 ===== About U-Boot Source Code =====

Khadas Docs