Setup ADB

There are two ways to setup ADB for Khadas VIM1, and the methods are in common with other Android products.

ADB over Wi-Fi/LAN

  • Ensure that one of Wi-Fi or Lan is connected.
  • Enable adb debugging on your device: Settings-->Developer options--->USB debugging
  • Check the IP address of your device: Settings-->About device--->Status--->IP
  • Run adb connect command, e.x.:
    $ adb connect 192.168.1.120
    connected to 192.168.1.120:5555
    $ adb shell

ADB over USB

  • Ensure the USB-C cable is connected to your PC.
  • Enable adb debugging on your device: Settings-->Developer options--->USB debugging
  • Open a terminal and type:
    $ adb shell

Resources