Differences

This shows you the differences between two versions of the page.

--- products:sbc:vim4:install-os:boot-into-upgrade-mode [2022/07/04 03:08]
nick
+++ products:sbc:vim4:install-os:boot-into-upgrade-mode [2022/07/25 22:35]
hyphop ↷ Page moved from products:sbc:vim4:install-os:boot-into-upgrade-mode to products:sbc:vim4:installing-os:boot-into-upgrade-mode
@@ Line 1: / Line 1: @@
-====== Boot into Upgrade Mode ======
+====== VIM4 Boot into Upgrade Mode ======
 In order to flash the OS into eMMC with USB Upgrade Tool, you need to put the board enter Upgrade Mode.\\
-There are 4 ways to boot into upgrade mode:
+<wrap info> There are 4 ways to boot into upgrade mode:</wrap>
   * TST Mode (Recommended)
   * Key Mode
   * Serial Mode
-  * Bootable SD Card
+  * Bootable TF Card
 <tabbox TST Mode (Recommended)>
@@ Line 25: / Line 25: @@
   - Hit ''SPACE'' on your keyboard at the moment of bootup to stop autoboot. This step will let VIM4 boot into U-Boot command line.
   - Type ''run update'' in the terminal of U-Boot. The Sys LED (White) will turn ON when you’ve entered Upgrade Mode.
-<tabbox Bootable SD Card>
+<tabbox Bootable TF Card>
-  - [[products:sbc:vim4:development:create-bootable-sd-card|Create a Bootable SD Card]].
+  - [[products:sbc:vim4:development:create-bootable-tf-card|Create a Bootable TF Card]].
-  - Insert a Bootable SD card into the slot.
+  - Insert a Bootable TF card into the slot.
   - Refer to this guide to setup your serial tool for VIM4.
   - Connect VIM4 to PC with a USB-C cable.

Khadas Docs