Differences

This shows you the differences between two versions of the page.

--- products:sbc:vim4:development:erase-emmc [2022/07/13 05:57]
nick
+++ products:sbc:vim4:development:erase-emmc [2022/09/05 04:15] (current)
nick
@@ Line 1: / Line 1: @@
 ====== VIM4 Erase eMMC ======
-There are 3 ways to erase the eMMC:
+There are three methods to erase the eMMC:
   * Serial Mode (Developers)
@@ Line 9: / Line 9: @@
 <tabbox Serial Mode (Developers)>
-  - Connect your PC to your SBC using a [[products:sbc:vim4:development:setup-serial-tool|Serial Debug Tool]].
+  - Connect your PC to the SBC using a [[products:sbc:vim4:development:setup-serial-tool|Serial Debug Tool]].
-  - Just as your SBC is booting-up, hit ''SPACE'' on your keyboard to enter U-Boot mode.
+  - As the SBC is booting-up, press ''SPACE''on the keyboard to enter the U-Boot mode.
   - Type ''store boot_erase bootloader'' into the U-Boot console, and wait for the erasure process to complete.
-  - After erasure is complete, type ''reboot'' or press the ''RESET'' button on your SBC.
+  - After erasure is completed, type ''reboot'' or press the ''RESET'' button on your SBC.
 Use the following serial Terminal print-out as a reference:
-```
+```shell
 kvim4# store boot_erase bootloader
 GUID Partition Table Header signature is wrong: 0x0 != 0x5452415020494645
@@ Line 58: / Line 58: @@
 <tabbox CLI Mode>
-This erasure method is suitable for an SBC with Linux installed:
+This erasure method is suitable for the SBC with Linux installed:
   - Power on and boot up.

Khadas Docs