User Tools
Sidebar
This is an old revision of the document!
Table of Contents
VIM4 OS Booting Priority
VIM4 booting in operating system in eMMC, TF Card, or SPI-Flash
In this page, you will know that Khadas SBC booting-up sequence for other medium, such as USB storage,NVMe,ect, depends on U-Boot configurations.
Default boot priority
- TF-Card top priority.
- eMMC
- SPI-Flash
U-Boot shell usage
We can swap the TF-card for the eMMC or SPI-Flash in U-Boot shell via KBI(Khadas Boot Instructions)
Change booting priority to SPI-Flash: TF-Card ⇒ eMMC ⇒ SPI-Flash
kvim4# kbi bootmode w emmc
Change booting priority to eMMC: TF-Card ⇒ SPI-Flash ⇒ eMMC
kvim4# kbi bootmode w spi
To make the booting priority swap take effect, you can reboot via mcu, or you can reboot the hardware by clicking the RESET button, or plugging the power supply or cable.
Linux command-line usage
i2cset -f -y 6 0x18 0x20 1 # setup default eMMC boot-mode
i2cset -f -y 6 0x18 0x20 0 # setup SPI-flash boot-mode
To reset the booting sequence via MCU
i2cset -f -y 6 0x18 0x91 1
OOWOW booting-up shortcut
Hold FUNCTION and short press RESET to force OOWOW service booting-up from SPI-flash, in this way skip over other boot sources .
TF-card slot must be empty