Differences

This shows you the differences between two versions of the page.

--- products:sbc:vim4:development:boot-sequence [2022/08/18 02:22]
hyphop old revision restored (2022/07/26 15:46)
+++ products:sbc:vim4:development:boot-sequence [2022/08/21 23:59]
ruby [Default boot priority]
@@ Line 3: / Line 3: @@
 ====== VIM4 OS Boot Priority ======
-VIM4 is capable of booting from the following devices: ''eMMC'', ''TF Card'', ''SPI-Flash''
+VIM4 is capable of boot-up from: ''eMMC'', ''TF Card'', ''SPI-Flash''
 <WRAP info >
-We talking there only about 1st stage SOC boot, next second stage os loading possible for any other diveices like USB storages, NVME etc ... and depends from ''u-boot'' configurations
+This page mainly introduces about the first-stage SoC boot. The second-stage OS flashing is possible for USB storage and NVMe, which depends on ''u-boot'' configurations
 </WRAP>
-/* not sure its needed ?
+===== Default option =====
-The OS image can be flased into the ''eMMC'', ''TF Card'' or ''SPI-Flash''.
-*/
-===== Default boot priority =====
+  - TF-Card <wrap important> always have highest priority</wrap>
-  - TF-Card <wrap important> TF-card will always take the highest priority. </wrap>
   - eMMC
   - SPI-Flash
@@ Line 35: / Line 31: @@
 <WRAP important >
-for apply setting for next boot, need reboot device by ''RESET'' button or re-plug power cable or power-off device or [[#hot-apply-setting-changes-via-mcu-reboot|reboot via mcu]]
+To make the booting priority swap take effect, you can [[#hot-apply-setting-changes-via-mcu-reboot|reboot via mcu]], or you can reboot the hardware by clicking the Reset button, or plugging the power supply or cable.
 </WRAP>

Khadas Docs

User Tools

Site Tools

Differences

Page Tools