User Tools
Sidebar
This is an old revision of the document!
Table of Contents
VIM4 GPIO Header
Reference table
| GPIO | Name | Physical | Physical | Name | GPIO |
|---|---|---|---|---|---|
| 5V | 1 | 21 | GND | ||
| 5V | 2 | 22 | PIN.Y17 | 501 | |
| HUB_D4N | 3 | 23 | PIN.Y18 | 502 | |
| HUB_D4P | 4 | 24 | GND | ||
| GND | 5 | 25 | PIN.T20 | 466 | |
| VCCMCU | 6 | 26 | PIN.T21 | 467 | |
| MCUBOOT0 | 7 | 27 | 3V3 | ||
| MCUSWDIO | 8 | 28 | GND | ||
| GND | 9 | 29 | PIN.T1 | 447 | |
| ADC_CH6 | 10 | 30 | PIN.T0 | 446 | |
| VDD1V8 | 11 | 31 | PIN.T3 | 449 | |
| ADC_CH3 | 12 | 32 | PIN.T2 | 448 | |
| 420 | SPDIFOUT | 13 | 33 | PIN.T4 | 450 |
| GND | 14 | 34 | GND | ||
| 491 | PIN.Y7 | 15 | 35 | PIN.Y8 | 482 |
| 490 | PIN.Y6 | 16 | 36 | PIN.T18 | 464 |
| GND | 17 | 37 | PIN.T19 | 465 | |
| PIN.D1 | 18 | 38 | PWR_EN1 | ||
| PIN.D2 | 19 | 39 | PIN.D15 | 417 | |
| 3V3 | 20 | 40 | GND |
GPIO Usage Examples
Before using a GPIO, ensure it is not configured for another function (e.g., I2C, SPI). If it is, you can reconfigure it as a standard GPIO by applying a Device Tree Overlay.
Once you have identified the correct GPIO number (e.g., 465), follow these steps to control it via the sysfs interface.
Export GPIO
Make the GPIO accessible to user space:
$ echo 465 | sudo tee /sys/class/gpio/export
Set GPIO Direction
Configure the GPIO as either an input or an output:
# Set GPIO output $ echo out | sudo tee /sys/class/gpio/gpio465/direction # Set GPIO input $ echo in | sudo tee /sys/class/gpio/gpio465/direction
Set GPIO value
If configured as an output, you can set its logic level:
# Set GPIO output high $ echo 1 | sudo tee /sys/class/gpio/gpio465/value # Set GPIO output low $ echo 0 | sudo tee /sys/class/gpio/gpio465/value
Read GPIO Input value
If configured as an input, read its current logic level:
$ cat /sys/class/gpio/gpio465/value
The command returns 0 (low) or 1 (high).
Unexport GPIO
When finished, release the GPIO:
$ echo 465 | sudo tee /sys/class/gpio/unexport
Troubleshooting
If you encounter an error similar to the following when exporting, the GPIO pin is likely reserved for another function (e.g., by the device tree):
echo 465 | sudo tee /sys/class/gpio/export tee: /sys/class/gpio/export: Invalid argument
Solution: Modify the Device Tree Overlay configuration to free the pin and define it as a standard GPIO.