Differences

This shows you the differences between two versions of the page.

--- products:sbc:vim4:add-ons:new-vim4-mipi-camera [2024/09/24 03:24]
nick
+++ products:sbc:vim4:add-ons:new-vim4-mipi-camera [2025/09/01 01:45] (current)
nick [Record video via gstreamer]
@@ Line 17: / Line 17: @@
 ==== Enable overlays ====
+<WRAP important >
+From version **1.7.5**, cameras are auto detected by default, no need any setup, you can just skip the overlay setup.
+</WRAP>
 If you want to use the MIPI camera, you need to enable it in [[products:sbc:vim4:configurations:device-tree-overlay|overlays]].\\
@@ Line 53: / Line 57: @@
 ```shell
-gst-launch-1.0 -e v4l2src device=/dev/media0  io-mode=mmap num-buffers=300 ! video/x-raw,format=NV21,width=1920,height=1080,framerate=30/1 ! amlvenc bitrate=8000 ! h264parse ! qtmux ! filesink location=~/test-h264.mp4
+gst-launch-1.0 -e v4l2src device=/dev/media0  io-mode=dmabuf num-buffers=300 ! video/x-raw,format=NV21,width=1920,height=1080,framerate=30/1 ! amlvenc bitrate=8000 ! h264parse ! qtmux ! filesink location=~/test-h264.mp4
 ```
@@ Line 61: / Line 65: @@
 ```shell
-gst-launch-1.0 -e v4l2src device=/dev/media0  io-mode=mmap num-buffers=300 ! video/x-raw,format=NV21,width=1920,height=1080,framerate=30/1 ! amlvenc bitrate=8000 ! h265parse ! qtmux ! filesink location=~/test-h265.mp4
+gst-launch-1.0 -e v4l2src device=/dev/media0  io-mode=dmabuf num-buffers=300 ! video/x-raw,format=NV21,width=1920,height=1080,framerate=30/1 ! amlvenc bitrate=8000 ! h265parse ! qtmux ! filesink location=~/test-h265.mp4
 ```
@@ Line 119: / Line 123: @@
 ```shell
-gst-launch-1.0 -e v4l2src device=/dev/media0 io-mode=mmap  ! video/x-raw,format=NV12,width=3840,height=2160,framerate=30/1 ! videoconvert ! waylandsink
+gst-launch-1.0 v4l2src device=/dev/media0 io-mode=mmap  ! video/x-raw,format=NV12,width=3840,height=2160,framerate=30/1 ! videoconvert ! waylandsink
 ```

Khadas Docs

User Tools

Site Tools

Differences

Page Tools