Khadas Docs

This page is read only. You can view the source, but not change it. Ask your administrator if you think this is wrong.
====== NPU Performance Analysis ======

Obtain NPU performance diagnostics and understand performance metrics.

===== Preparation =====

==== Upgrade The System ====

Please refer to the [[../configurations/upgrade-system | upgrade guide]].

==== Reload the Driver Module ====

1. Uninstall the NPU module:

```shell
$ sudo rmmod galcore
```

2. Reinstall NPU module:

```shell
$ sudo insmod /lib/modules/$(uname -r)/kernel/drivers/amlogic/npu/galcore.ko gpuProfiler=1 showArgs=1
```

==== Set environment variables ====

```shell
$ export VIV_VX_PROFILE=1
$ export VIV_VX_DEBUG_LEVEL=1
```

===== Fetch diagnostic data of the NPU =====

==== Run Model ====

Here is a sample using the [[npu-prebuilt-demo-usage| inception example]] to run on the NPU.

```shell
$ aml_npu_demo_binaries/inceptionv3/VIM3$ ./run.sh
#productname=VIPNano-QI, pid=0x88
Created VX Thread: 0xa69a21c0
Create Neural Network: 59ms or 59455us
Verify...
generate command buffer, device count=1, core count per-device: 1,
---------------------------Begin VerifyTiling -------------------------
AXI-SRAM = 1048576 Bytes VIP-SRAM = 522240 Bytes SWTILING_PHASE_FEATURES[1, 1, 0]
  0 NBG [(   0    0    0 0,        0, 0x(nil)(0x(nil), 0x(nil)) ->    0    0    0 0,        0, 0x(nil)(0x(nil), 0x(nil))) k(0 0    0,        0) pad(0 0) pool(0 0, 0 0)]

 id IN [ x  y  w   h ]   OUT  [ x  y  w  h ] (tx, ty, kpc) (ic, kc, kc/ks, ks/eks, kernel_type)
   0 NBG DD 0x(nil) [   0    0        0        0] -> DD 0x(nil) [   0    0        0        0] (  0,   0,   0) (       0,        0, 0.000000%, 0.000000%, NONE)

PreLoadWeightBiases = 1048576  100.000000%
---------------------------End VerifyTiling -------------------------
Verify Graph: 0ms or 823us
Start run graph [1] times...
layer id: 0 layer name:network_binary_graph operation[0]:unkown operation type target:unkown operation target.
uid: 0
op_abs_id: 0
execution time:             20845 us
[     1] TOTAL_READ_BANDWIDTH  (MByte): 71.703380
[     2] TOTAL_WRITE_BANDWIDTH (MByte): 17.810649
[     3] AXI_READ_BANDWIDTH  (MByte): 30.981305
[     4] AXI_WRITE_BANDWIDTH (MByte): 14.130429
[     5] DDR_READ_BANDWIDTH (MByte): 40.722075
[     6] DDR_WRITE_BANDWIDTH (MByte): 3.680220
[     7] GPUTOTALCYCLES: 16697255
[     8] GPUIDLECYCLES: 296080
VPC_ELAPSETIME: 21124
*********
Run the 1 time: 21.00ms or 21609.00us
vxProcessGraph execution time:
Total   21.00ms or 21625.00us
Average 21.62ms or 21625.00us
 --- Top5 ---
  2: 0.833984
795: 0.009102
974: 0.003592
408: 0.002207
393: 0.002111
Exit VX Thread: 0xa69a21c0
```

==== Diagnostic data description ====

^ Name                   ^ Description            ^
| **TOTAL_READ_BANDWIDTH** | Total read bandwidth  |
| **TOTAL_WRITE_BANDWIDTH**| Total write bandwidth |
| **AXI_READ_BANDWIDTH**   | AXI_SRAM read bandwidth|
| **AXI_WRITE_BANDWIDTH**  | AXI_SRAM write bandwidth|
| **DDR_READ_BANDWIDTH**   | DDR read bandwidth    |
| **DDR_WRITE_BANDWIDTH**  | DDR write bandwidth   |

==== Calculate Usage Rate ====

    * ''GPUTOTALCYCLES''     : Total number of cycles.
    * ''GPUIDLECYCLES''      : Number of cycles in idle state.

Usage rate = (''GPUTOTALCYCLES''-''GPUIDLECYCLES'')/''GPUTOTALCYCLES''.
Khadas Docs

User Tools

Site Tools

Page Tools
