Differences

This shows you the differences between two versions of the page.

--- products:sbc:vim3:install-os:boot-into-upgrade-mode [2023/03/23 03:37]
xiong [VIM3/3L Boot into Upgrade Mode]
+++ products:sbc:vim3:install-os:boot-into-upgrade-mode [2023/03/23 21:33] (current)
nick
@@ Line 32: / Line 32: @@
   - Connect VIM3 to PC with a USB-C cable.
-  - Refer to [[products:sbc:vim3:development:setup-serial-tool|Setup Serial Too]] to setup your Serial Tool for VIM3.
+  - Refer to [[products:sbc:vim3:development:setup-serial-tool|Setup Serial Tool]] to setup your Serial Tool for VIM3.
   - Once again, make sure you’ve done the correct connections and setup.
   - Hit ''SPACE'' on your keyboard at the moment of bootup to stop autoboot. This step will let VIM3 boot into U-Boot command line.
   - Type ''run update'' in the terminal of U-Boot. The Sys LED (White) will turn ON when you’ve entered Upgrade Mode.
+===== MRegister Mode =====
+  - Power on VIM3.
+  - Use a tweezer to short-circuit the two pads of the M register, and without releasing…
+  - Short press the Reset key and then release it, to boot into upgroup mode
 ===== Bootable TF Card =====

Khadas Docs