Differences

This shows you the differences between two versions of the page.

--- products:sbc:vim1s:install-os:boot-into-upgrade-mode [2022/07/17 21:31]
127.0.0.1 external edit
+++ products:sbc:vim1s:install-os:boot-into-upgrade-mode [2022/09/28 06:45] (current)
nick
@@ Line 1: / Line 1: @@
-====== VIM4 Boot into Upgrade Mode ======
+{{indexmenu_n>40}}
+====== VIM1S Boot into Upgrade Mode ======
 In order to flash the OS into eMMC with USB Upgrade Tool, you need to put the board enter Upgrade Mode.\\
@@ Line 11: / Line 14: @@
 <tabbox TST Mode (Recommended)>
-  - Connect VIM4 to PC with a USB-C cable.
+  - Connect VIM1S to PC with a USB-C cable.
   - Quickly press the ''Function'' key **3 times in 2 seconds**, then release the key. You will see the Power LED (Red) blink for about 3 seconds.
   - After the Power LED (Red) turns OFF, this indicates that the board is in Upgrade Mode (Maskrom Mode).
 <tabbox Key Mode>
-  - Connect VIM4 to PC with a USB-C cable.
+  - Connect VIM1S to PC with a USB-C cable.
   - Long press the ''POWER'' key without releasing it.
   - Short press the ''RESET'' key and release it.
   - Count for 2 to 3 seconds, then release the ''POWER'' key to enter into Upgrade Mode. The Sys LED (White) will turn on when you’ve entered Upgrade Mode.
 <tabbox Serial Mode>
-  - Connect VIM4 to PC with a USB-C cable.
+  - Connect VIM1S to PC with a USB-C cable.
-  - Refer to [[products:sbc:vim4:development:setup-serial-tool|Setup Serial Too]] to setup your Serial Tool for VIM4.
+  - Refer to [[products:sbc:vim1s:development:setup-serial-tool|Setup Serial Too]] to setup your Serial Tool for VIM1S.
   - Once again, make sure you’ve done the correct connections and setup.
-  - Hit ''SPACE'' on your keyboard at the moment of bootup to stop autoboot. This step will let VIM4 boot into U-Boot command line.
+  - Hit ''SPACE'' on your keyboard at the moment of bootup to stop autoboot. This step will let VIM1S boot into U-Boot command line.
   - Type ''run update'' in the terminal of U-Boot. The Sys LED (White) will turn ON when you’ve entered Upgrade Mode.
 <tabbox Bootable TF Card>
-  - [[products:sbc:vim4:development:create-bootable-tf-card|Create a Bootable TF Card]].
+  - [[products:sbc:vim1s:development:create-bootable-tf-card|Create a Bootable TF Card]].
   - Insert a Bootable TF card into the slot.
-  - Refer to this guide to setup your serial tool for VIM4.
+  - Refer to this guide to setup your serial tool for VIM1S.
-  - Connect VIM4 to PC with a USB-C cable.
+  - Connect VIM1S to PC with a USB-C cable.
-  - Hit ''SPACE'' key at the moment of bootup to stop autoboot. This step will let VIM4 boot into U-Boot.
+  - Hit ''SPACE'' key at the moment of bootup to stop autoboot. This step will let VIM1S boot into U-Boot.
   - Type ''run update'' in the U-Boot terminal.
 </tabbox>

Khadas Docs

User Tools

Site Tools

Differences

Page Tools