User Tools
Sidebar
products:sbc:vim1s:hardware:interfaces
This is an old revision of the document!
VIM1S Interfaces
Front(Blue)
| Component | Purpose | |
|---|---|---|
| 1 | USB-A | USB 2.0 speed, 500mA max output |
| 2 | RJ-45 | 10/100 Mbps Ethernet |
| 3 | HDMI | HDMI 2.1b with 3D, HDR, CEC and HDCP 2.2 |
| 4 | USB-C | USB 2.0 OTG and 5V power input, can be used for upgrading the OS |
| 5 | USB-A | USB 2.0 speed, 750mA max output |
| 6 | Fan Header | 4-wire fan header utilising pulse width modulation |
| 7 | Reset Button | Force reboot your VIM1S in the event of a system freeze |
| 8 | Function Button | Press this 3 times in 2 seconds to enter MaskROM mode |
| 9 | Power Button | This button turns on your VIM1S |
| A | RTC Battery Header | Header for attaching a battery for the real time clock |
| B | SPI Flash | Flash memory module that interfaces over SPI |
| C | 40-Pin GPIO | Learn how to access the GPIO from here, or use it to add a Toneboard |
| D | Infrared Module | Dual channel infrared receiver for use with Khadas IR remote |
| E | LEDs | Status indicator LEDs |
| F | MHF2 Wi-Fi / Bluetooth Connector | Wi-Fi / BT Antenna connector |
Back(Red)
| Component | Purpose | |
|---|---|---|
| 1 | VIN | 5V power input |
| 2 | Micro-SD Card Slot | Boot alternative OSes via a Micro-SD card, and for extra storage |
| 3 | IO | FPC IO connector |
| 4 | XPWR Pads | Connect an external power switch using these pads |
Buttons
| Reset | Function | Power | Purpose |
|---|---|---|---|
| x | Force Reboot VIM1S | ||
| x | Enter Upgrade Mode (TST) | ||
| x | Power On/Wake Up VIM1S | ||
| x | x | Enter Upgrade Mode (KEYS) | |
| x | x | x | Erase EMMC |
GPIO Pinout
Last modified: 2022/09/22 23:06 by hyphop