Differences

This shows you the differences between two versions of the page.

--- products:sbc:vim1s:hardware:interfaces [2022/09/22 23:27]
hyphop
+++ products:sbc:vim1s:hardware:interfaces [2022/10/20 02:21]
hyphop [GPIO Pinout]
@@ Line 1: / Line 1: @@
 ====== VIM1S Interfaces ======
+===== Top side =====
-{{../vim1s-interfaces-01.webp?400 }}
+{{products:sbc:vim1s:hardware:vim1s-interfaces-top-side.webp?600|}}
-|    ^ Component             ^ Purpose  ^
-|1|USB-A|USB 2.0 speed, 500mA max output|
-|2|RJ-45|10/100 Mbps Ethernet|
-|3|HDMI|HDMI 2.1b with 3D, HDR, CEC and HDCP 2.2|
-|4|USB-C|USB 2.0 OTG and 5V power input, can be used for upgrading the OS|
-|5|USB-A|USB 2.0 speed, 750mA max output|
-|6|Fan Header|4-wire fan header utilising pulse width modulation|
-|7|Reset Button|Force reboot your VIM1S in the event of a system freeze|
-|8|Function Button|Press this 3 times in 2 seconds to enter MaskROM mode|
-|9|Power Button|This button turns on your VIM1S|
-|A|RTC Battery Header|Header for attaching a battery for the real time clock|
-|B|SPI Flash|Flash memory module that interfaces over SPI|
-|C|40-Pin GPIO|Learn how to access the GPIO from here, or use it to add a Toneboard|
-|D|Infrared Module|Dual channel infrared receiver for use with Khadas IR remote|
-|E|LEDs|Status indicator LEDs|
-|F|MHF2 Wi-Fi / Bluetooth Connector|Wi-Fi / BT Antenna connector|
+|    ^ Component                ^ Purpose                                                                                                                    ^
+| 1  | USB-A                    | USB 2.0 speed, 500mA max output                                                                                            |
+| 2  | RJ-45                    | 10/100 Mbps Ethernet                                                                                                       |
+| 3  | HDMI                     | HDMI 2.1b with 3D, HDR, CEC and HDCP 2.2                                                                                   |
+| 4  | USB-C                    | USB 2.0 OTG and 5V power input, can be used for upgrading the OS                                                           |
+| 5  | USB-A                    | USB 2.0 speed, 750mA max output                                                                                            |
+| 6  | Fan header               | Khadas 4-wire PWM fan                                                                                                      |
+| 7  | Reset button             | Device hardware reset                                                                                                      |
+| 8  | Function button          | [[#hardware-buttons|Multi-functional]]                                                                                     |
+| 9  | Power button             | Turns on/off device and other [[#hardware-buttons|multi-functions]]                                                        |
+| A  | RTC battery header       | Attaching real-time clock battery                                                                                          |
+| B  | SPI-Flash                | 32MB SPI-Flash memory                                                                                                      |
+| C  | 40-Pin GPIO              | [[products/sbc/vim1s/applications/gpio/40pin-header]], and for extensions: [[products/audio/tone1/user-manual|Tone]], ...  |
+| D  | Infrared module          | Dual channel infrared receiver for use with Khadas IR remote                                                               |
+| E  | LEDs                     | Status indicator LEDs                                                                                                      |
+| F  | MCU                      | Advanced device hardware control                                                                                           |
+| G  | MHF2 Wi-Fi/BT connector  | Wi-Fi/Bluetooth antenna connector                                                                                          |
+===== Back side =====
+{{products:sbc:vim1s:hardware:vim1s-interfaces-back-side.webp?600|}}
-{{../vim1s-interfaces-02.webp?400}}
+|    ^ Component             ^ Purpose  ^
-{{../vim1s-interfaces-03.webp?400}}
+|1|VIN|5V additional power input|
-{{../vim1s-interfaces-04.webp?400}}
+|2|Micro-SD card slot|SD-card storage, or boot device from SD card |
+|3|IO|Extension FPC IO connector|
+|4|XPWR Pads|Connect an external power switch using these pads|
-{{gallery>../?*-interfaces-*.webp&lightbox}}
-/*
+===== Hardware buttons =====
-{{:products:sbc:vim1s:hardware:vim1s-interfaces.jpg?1000|}}
-{{:products:sbc:vim1s:hardware:vim1s-circle-labels.jpg?1000|}}
+{{:products:sbc:vim1s:hardware:vim1s-buttons.webp?400|}}
-*/
-/*
+^  Reset  ^  Function  ^  Power  ^  Purpose                   ^
-<tabbox Front(Blue)>
+|  x      |            |         | Hardware device reset      |
-|    ^ Component             ^ Purpose  ^
+|         |  x         |         | Enter upgrade mode (TST)   |
-|1|USB-A|USB 2.0 speed, 500mA max output|
+|         |            |  x      | Power-On / Wake-Up device  |
-|2|RJ-45|10/100 Mbps Ethernet|
+|  x      |            |  x      | Enter upgrade mode (KEYS)  |
-|3|HDMI|HDMI 2.1b with 3D, HDR, CEC and HDCP 2.2|
-|4|USB-C|USB 2.0 OTG and 5V power input, can be used for upgrading the OS|
-|5|USB-A|USB 2.0 speed, 750mA max output|
-|6|Fan Header|4-wire fan header utilising pulse width modulation|
-|7|Reset Button|Force reboot your VIM1S in the event of a system freeze|
-|8|Function Button|Press this 3 times in 2 seconds to enter MaskROM mode|
-|9|Power Button|This button turns on your VIM1S|
-|A|RTC Battery Header|Header for attaching a battery for the real time clock|
-|B|SPI Flash|Flash memory module that interfaces over SPI|
-|C|40-Pin GPIO|Learn how to access the GPIO from here, or use it to add a Toneboard|
-|D|Infrared Module|Dual channel infrared receiver for use with Khadas IR remote|
-|E|LEDs|Status indicator LEDs|
-|F|MHF2 Wi-Fi / Bluetooth Connector|Wi-Fi / BT Antenna connector|
-<tabbox Back(Red)>
+==== Special button shortcuts ====
+  * Press ''FUNCTION'' 3 times in 2 seconds to enter MaskROM mode
+  * Boot [[OOWOW:]] - hold ''FUNCTION'' and short press ''RESET''
+  * Other [[software/oowow/user-manual#hardware-buttons|OOWOW button shortcuts]]
-|    ^ Component             ^ Purpose  ^
+===== GPIO Pinout =====
-|1|VIN|5V power input|
-|2|Micro-SD Card Slot|Boot alternative OSes via a Micro-SD card, and for extra storage|
-|3|IO|FPC IO connector|
-|4|XPWR Pads|Connect an external power switch using these pads|
+{{:products:sbc:vim1s:hardware:vim1s-pinout.webp?400|}}
-<tabbox Buttons>
+[[../applications/gpio/40pin-header]]
-^ Reset  ^ Function  ^ Power  ^ Purpose                   ^
-|x| | |Force Reboot VIM1S|
-| |x| |Enter Upgrade Mode (TST)|
-| | |x|Power On/Wake Up VIM1S|
-|x| |x|Enter Upgrade Mode (KEYS)|
-|x|x|x|Erase EMMC|
+/*
+===== VIM1S interfaces gallery =====
+{{gallery>../?*-interfaces-*.webp&lightbox}}
-<tabbox GPIO Pinout>
-</tabbox>
 */

Khadas Docs

User Tools

Site Tools

Differences

Page Tools