Khadas Docs

Amazing Khadas, always amazes you!

User Tools

Site Tools


products:sbc:vim1:install-os:install-os-into-emmc-via-usb-tool

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
products:sbc:vim1:install-os:install-os-into-emmc-via-usb-tool [2022/07/13 21:17]
frank
products:sbc:vim1:install-os:install-os-into-emmc-via-usb-tool [2022/09/30 04:49] (current)
nick
Line 1: Line 1:
-====== VIM1 Install OS into eMMC via USB Tool ======+{{indexmenu_n>10}}
  
-==== Install OS into eMMC on Windows ==== 
  
-Please check [[products:sbc:vim1:install-os:install-os-into-emmc-on-windows|]].+====== VIM1 Install OS into eMMC via USB Flash Tool ======
  
-==== Install OS into eMMC on Ubuntu ====+===== Install on Windows PC =====
  
 +==== Preparation ====
  
-Please check [[products:sbc:vim1:install-os:install-os-into-emmc-on-ubuntu|]].+Download the [[dl>products/vim1/tool/usb_burning_tool_v2.2.0.zip|USB Burning Tool]] and extract it to somewhere. 
 + 
 +==== Install the Flash Tool ==== 
 + 
 +Run ''setup_v2.x.x.exe'' to install the tool. 
 + 
 +==== Install the OS ==== 
 + 
 +  * Open ''USB_Burning_tool_v2.x.x.exe'', click ''File''-->''Import Image'' to choose an [[dl>products/vim1/firmware/|OS image]] for your board. 
 +  * Connect your board to your PC with a USB-C data cable (the board will power on automatically). 
 +  * Put your board into [[/products/sbc/vim1/install-os/boot-into-upgrade-mode|Upgrade Mode]]. 
 +  * If you have performed steps 2 and 3 correctly, your PC will automatically discover your board as an attached USB-device. 
 +  * Now all you need to do is to click the ''Start'' button and wait for burning to complete. 
 + 
 +{{/products:sbc:vim2:install-os:usb-upgrade-tool-interface-v217-en.png?800}} 
 + 
 +<WRAP info > 
 +  * To interrupt burning, click the Stop button, then close the USB Upgrade Tool. Note that the eMMC may already have been completely erased if you went past the 15% mark. 
 +  * An [[/products/sbc/vim1/hardware/external-power-supply|External Power Supply]] may be required in cases where your PC cannot provide enough electrical power for the burning process. 
 +</WRAP> 
 + 
 +===== Install OS into eMMC on Ubuntu ===== 
 + 
 +{{page>products/sbc/common/install-os/install-os-into-emmc-on-ubuntu&noheader}}
Last modified: 2022/07/13 21:17 by frank