Differences

This shows you the differences between two versions of the page.

--- products:sbc:vim-5:install-os:boot-into-upgrade-mode [2026/09/14 03:54]
nick
+++ products:sbc:vim-5:install-os:boot-into-upgrade-mode [2026/09/14 03:57] (current)
nick
@@ Line 21: / Line 21: @@
   - Long press the ''POWER'' key without releasing it.
   - Short press the ''RESET'' key and release it.
-  - Count for 2 to 3 seconds, then release the ''POWER'' key to enter into Upgrade Mode. The Sys LED (White) will turn on when you’ve entered Upgrade Mode.
+  - Count for 2 to 3 seconds, then release the ''POWER'' key to enter into Upgrade Mode.
 <tabbox Serial Mode>
   - Connect VIM 5 to PC with a USB-C cable.
   - Refer to [[products:sbc:vim-5:development:setup-serial-tool|Setup Serial Too]] to setup your Serial Tool for VIM 5.
   - Once again, make sure you’ve done the correct connections and setup.
-  - Hit ''SPACE'' on your keyboard at the moment of bootup to stop autoboot. This step will let VIM1S boot into U-Boot command line.
+  - Hit ''SPACE'' on your keyboard at the moment of bootup to stop autoboot. This step will let VIM 5 boot into U-Boot command line.
-  - Type ''run update'' in the terminal of U-Boot. The Sys LED (White) will turn ON when you’ve entered Upgrade Mode.
+  - Type ''run update'' in the terminal of U-Boot.
 <tabbox Bootable TF Card>
   - [[products:sbc:vim-5:development:create-bootable-tf-card|Create a Bootable TF Card]].

Khadas Docs