Khadas Docs

Amazing Khadas, always amazes you!

User Tools

Site Tools

Home / products / sbc / vim-5 / install-os / boot-into-upgrade-mode
products:sbc:vim-5:install-os:boot-into-upgrade-mode

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Next revision 		Previous revision
products:sbc:vim-5:install-os:boot-into-upgrade-mode [2026/09/14 03:53]
nick created 		products:sbc:vim-5:install-os:boot-into-upgrade-mode [2026/09/14 03:57] (current)
nick
Line 21: Line 21:
   - Long press the ''POWER'' key without releasing it.   - Long press the ''POWER'' key without releasing it.
   - Short press the ''RESET'' key and release it.   - Short press the ''RESET'' key and release it.
-  - Count for 2 to 3 seconds, then release the ''POWER'' key to enter into Upgrade Mode. The Sys LED (White) will turn on when you’ve entered Upgrade Mode.+  - Count for 2 to 3 seconds, then release the ''POWER'' key to enter into Upgrade Mode.
 <tabbox Serial Mode> <tabbox Serial Mode>
   - Connect VIM 5 to PC with a USB-C cable.   - Connect VIM 5 to PC with a USB-C cable.
-  - Refer to [[products:sbc:vim1s:development:setup-serial-tool|Setup Serial Too]] to setup your Serial Tool for VIM1S.+  - Refer to [[products:sbc:vim-5:development:setup-serial-tool|Setup Serial Too]] to setup your Serial Tool for VIM 5.
   - Once again, make sure you’ve done the correct connections and setup.   - Once again, make sure you’ve done the correct connections and setup.
-  - Hit ''SPACE'' on your keyboard at the moment of bootup to stop autoboot. This step will let VIM1S boot into U-Boot command line. +  - Hit ''SPACE'' on your keyboard at the moment of bootup to stop autoboot. This step will let VIM 5 boot into U-Boot command line. 
-  - Type ''run update'' in the terminal of U-Boot. The Sys LED (White) will turn ON when you’ve entered Upgrade Mode.+  - Type ''run update'' in the terminal of U-Boot.
 <tabbox Bootable TF Card> <tabbox Bootable TF Card>
-  - [[products:sbc:vim1s:development:create-bootable-tf-card|Create a Bootable TF Card]].+  - [[products:sbc:vim-5:development:create-bootable-tf-card|Create a Bootable TF Card]].
   - Insert a Bootable TF card into the slot.   - Insert a Bootable TF card into the slot.
-  - Refer to this guide to setup your serial tool for VIM1S.+  - Refer to this guide to setup your serial tool for VIM 5.
   - Connect VIM 5 to PC with a USB-C cable.   - Connect VIM 5 to PC with a USB-C cable.
-  - Hit ''SPACE'' key at the moment of bootup to stop autoboot. This step will let VIM1S boot into U-Boot.+  - Hit ''SPACE'' key at the moment of bootup to stop autoboot. This step will let VIM 5 boot into U-Boot.
   - Type ''run update'' in the U-Boot terminal.   - Type ''run update'' in the U-Boot terminal.
 </tabbox> </tabbox>
Last modified: 2026/09/14 03:53 by nick

Page Tools

Khadas Site

Khadas Community

Khadas GitHub

Khadas Downloads