products:sbc:edge2:install-os:install-os-into-emmc-via-usb-tool

This is an old revision of the document!

Table of Contents

Edge2 Install OS into eMMC via USB Tool
- Install OS into eMMC on Windows
  - Edge2 Install OS into eMMC on Windows
  - Install OS into eMMC on Ubuntu
Discussion

Edge2 Install OS into eMMC via USB Tool

Install OS into eMMC on Windows

Edge2 Install OS into eMMC on Windows

Introduction

This document mainly introduces how to use the burning tool to burn the system to Khadas SBC under Windows.

Preparation

Dowload the rk_dev_tool and extract it to somewhere.

Install USB Drivers

Enter DriverAssitant folder, then run DriverInstall.exe.
Double click Install to install.
Double click Unistall to uninstall.

Flash Image

Run RKDevTool.exe. Then clink Upgrade Firmware→Firmware to select a image.
Connect Edge and PC with a USB-C data-cable (Edge will power-on automatically).
Put your board into Upgrade Mode.
Your PC should have found your Edge device as a connected USB device.
Now all you need to do is to click the Upgrade button of the tool and wait for upgrading to complete.

Install OS into eMMC on Ubuntu

Last modified: 2022/09/27 23:31 by nick

Khadas Community

Khadas Downloads