Differences

This shows you the differences between two versions of the page.

--- products:sbc:edge2:install-os:install-os-into-emmc-via-usb-tool [2022/07/16 00:00]
nick
+++ products:sbc:edge2:install-os:install-os-into-emmc-via-usb-tool [2025/05/14 22:06] (current)
nick
@@ Line 1: / Line 1: @@
-====== Edge2 Install OS into eMMC via USB Tool ======
+{{indexmenu_n>20}}
-==== Install OS into eMMC on Windows ====
-Please check [[products:sbc:edge2:install-os:install-os-into-emmc-on-windows|]].
+====== Edge2 Install OS into eMMC via USB Flash Tool ======
-==== Install OS into eMMC on Ubuntu ====
+===== Introduction =====
+This document mainly introduces how to use the USB flash tool to install the OS image to Khadas SBC onboard eMMC.
+===== Install on Windows PC =====
+==== Preparation ====
+Dowload [[dl>products/edge2/tools/rkdevtool_release_v3.28.zip|rkdevtool_release_v3.28]] and [[dl>products/edge2/tools/driver-assitant_v5.13.zip|driver-assitant_v5.13]] then extract them to somewhere.
+==== Install USB Drivers ====
+  - Enter ''driver-assitant'' folder, then run ''DriverInstall.exe''.
+  - Double click ''Unistall'' to uninstall.
+  - Double click ''Install'' to install.
+{{products:sbc:edge2:install-os:driver-install.webp}}
+==== Install the OS ====
+  - Run ''RKDevTool.exe''. Then clink ''Upgrade Firmware''->''Firmware'' to select a image.
+  - Connect Edge and PC with a USB-C data-cable (Edge will power-on automatically).
+  - Put your board into [[products/sbc/edge2/install-os/boot-into-upgrade-mode|Upgrade Mode]].
+  - Your PC should have found your Edge device as a connected USB device.
+  - Now all you need to do is to click the ''Upgrade'' button of the tool and wait for upgrading to complete.
+{{products:sbc:edge2:install-os:flash-image.webp}}
+===== Install on Ubuntu PC =====
+{{page>products/sbc/common/install-os/install-os-into-emmc-on-ubuntu&noheader}}
-Please check [[products:sbc:edge2:install-os:install-os-into-emmc-on-ubuntu|]].

Khadas Docs

User Tools

Site Tools

Differences

Page Tools