Khadas Docs

Amazing Khadas, always amazes you!

User Tools

Site Tools

Home / products / sbc / edge2 / install-os / boot-into-upgrade-mode
products:sbc:edge2:install-os:boot-into-upgrade-mode

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
products:sbc:edge2:install-os:boot-into-upgrade-mode [2022/09/02 03:35]
nick 		products:sbc:edge2:install-os:boot-into-upgrade-mode [2022/09/27 23:55] (current)
nick
Line 1: Line 1:
 +{{indexmenu_n>40}}
 +
 +
 ====== Edge2 Boot into Upgrade Mode ====== ====== Edge2 Boot into Upgrade Mode ======
  
Line 5: Line 8:
  
 <WRAP info > <WRAP info >
-There are 4 ways to boot into upgrade mode:+There are 3 ways to boot into upgrade mode:
  
   * TST Mode (Recommended)   * TST Mode (Recommended)
Line 15: Line 18:
   - Connect Edge2 to PC with a USB-C cable.   - Connect Edge2 to PC with a USB-C cable.
   - Quickly press the ''Function'' key **3 times in 2 seconds**, then release the key. You will see the Power LED (Red) blink for about 3 seconds.   - Quickly press the ''Function'' key **3 times in 2 seconds**, then release the key. You will see the Power LED (Red) blink for about 3 seconds.
-  - After the Power LED (Red) turns OFF, this indicates that the board is in Upgrade Mode (Maskrom Mode).+  - After the ''Power LED'' (Red) turns OFF, this indicates that the board is in Upgrade Mode (Maskrom Mode).
  
 <tabbox Serial Mode> <tabbox Serial Mode>
Line 22: Line 25:
   - Once again, make sure you’ve done the correct connections and setup.   - Once again, make sure you’ve done the correct connections and setup.
   - Hit ''SPACE'' on your keyboard at the moment of bootup to stop autoboot. This step will let Edge2 boot into U-Boot command line.   - Hit ''SPACE'' on your keyboard at the moment of bootup to stop autoboot. This step will let Edge2 boot into U-Boot command line.
-  - Type ''run update'' in the terminal of U-Boot. The Red LED will turn ON when you’ve entered Upgrade Mode.+  - Type ''run update'' in the terminal of U-Boot. The ''Red LED'' will turn ON when you’ve entered Upgrade Mode.
  
 <tabbox Linux Command Line> <tabbox Linux Command Line>
Line 28: Line 31:
   - Once again, make sure you’ve done the correct connections and setup.   - Once again, make sure you’ve done the correct connections and setup.
   - Boot into Android or Linux command line.   - Boot into Android or Linux command line.
-  - For Linux, execute ''sudo reboot loader''. For Android, execute ''su'' and ''reboot loader''. The system will reboot and enter Upgrade Mode. You will see the sys-led turn ON when you’ve entered Upgrade Mode (Loader Mode).+  - For Linux, execute ''sudo reboot loader''. For Android, execute ''su'' and ''reboot loader''. The system will reboot and enter Upgrade Mode. You will see the ''Red LED'' turn ON when you’ve entered Upgrade Mode (Loader Mode).
  
 </tabbox> </tabbox>
  
Last modified: 2022/09/02 03:35 by nick

Page Tools

Khadas Site

Khadas Community

Khadas GitHub

Khadas Downloads