User Tools
products:sbc:edge2:add-ons:edge2-mipi-camera
Differences
This shows you the differences between two versions of the page.
| Both sides previous revision Previous revision Next revision | Previous revision | ||
|
products:sbc:edge2:add-ons:edge2-mipi-camera [2024/10/29 05:43] jacobe |
products:sbc:edge2:add-ons:edge2-mipi-camera [2025/09/02 04:01] (current) gray |
||
|---|---|---|---|
| Line 8: | Line 8: | ||
| - | Edge2 CAM3 support **4K@60fps** record. If your **hardware version is V13**, the **CAM2** also can support **4K@60fps** record. | + | <WRAP important > |
| + | |||
| + | Edge2 CAM3 support **4K@60fps** record. If your **hardware version is V13 or later**, the **CAM2** also can support **4K@60fps** record. | ||
| **Check Hardware Version** | **Check Hardware Version** | ||
| - | ``` | + | ```shell |
| $ cat / | $ cat / | ||
| ``` | ``` | ||
| - | V13 will show like '' | + | V13 or later version |
| - | Due to the different hardware versions, **CAM2 is set to 4K@30fps by default**. This is for compatibility with non-V13 | + | Due to the different hardware versions, **CAM2 is set to 4K@30fps by default**. This is for compatibility with V11 or V12 hardware versions to |
| - | ``` | + | ensure proper operation. If your device supports 4K@60fps, you can enable this mode by adding an overlay |
| - | $ sudo vi / | + | |
| - | fdt_overlays=cam2-4lane | + | |
| - | ``` | + | |
| - | ==== Upgrade System ==== | ||
| - | Please follow the [[products: | + | Edit ''/ |
| - | ==== Video Node ==== | + | <tabbox Fenix 1.7.4 or older version> |
| + | About IMX585 and IMX678, the two cameras were disabled by default. So V11 or V12 hardware version should replace '' | ||
| - | You can find the video nodes from the table below. | + | Edit ''/ |
| - | | ^ Video Node(5.10.66) | ||
| - | ^ CAM1 | / | ||
| - | ^ CAM2 | / | ||
| - | ^ CAM3 | / | ||
| - | ==== Record Video with Gstreamer ==== | + | V13 or later hardware version should be set '' |
| - | <tabbox kernel 5.10.66> | + | Edit ''/ |
| - | Record video from '' | + | <tabbox Fenix 1.7.5 or later version> |
| - | ```shell | + | We enbale imx585 and imx678 by default, so just add overlay node '' |
| - | gst-launch-1.0 v4l2src device=/ | + | |
| - | ``` | + | |
| - | Record video from '' | + | </ |
| - | ```shell | + | You need to reboot the device |
| - | gst-launch-1.0 v4l2src | + | |
| - | ``` | + | |
| - | Record video from '' | + | </ |
| - | ```shell | + | ==== Upgrade System ==== |
| - | gst-launch-1.0 v4l2src device=/ | + | |
| - | ``` | + | Please follow the [[products: |
| + | |||
| + | ==== Video Node ==== | ||
| + | |||
| + | |||
| + | You can find the video nodes from the table below. | ||
| + | |||
| + | | ^ Video Node ^ | ||
| + | ^ CAM1 | | ||
| + | ^ CAM2 | / | ||
| + | ^ CAM3 | / | ||
| + | |||
| + | ==== Record Video with Gstreamer ==== | ||
| - | <tabbox Other version> | ||
| Record video from '' | Record video from '' | ||
| ```shell | ```shell | ||
| - | gst-launch-1.0 v4l2src device=/ | + | gst-launch-1.0 v4l2src device=/ |
| ``` | ``` | ||
| Line 69: | Line 71: | ||
| ```shell | ```shell | ||
| - | gst-launch-1.0 v4l2src device=/ | + | gst-launch-1.0 v4l2src device=/ |
| ``` | ``` | ||
| For 4K@60fps, framerate should be set 60/1 | For 4K@60fps, framerate should be set 60/1 | ||
| Line 76: | Line 78: | ||
| ```shell | ```shell | ||
| - | gst-launch-1.0 v4l2src device=/ | + | gst-launch-1.0 v4l2src device=/ |
| ``` | ``` | ||
| - | </ | ||
| /* | /* | ||
| Line 168: | Line 169: | ||
| sudo apt install v4l-utils | sudo apt install v4l-utils | ||
| ``` | ``` | ||
| - | |||
| - | <tabbox kernel 5.10.66> | ||
| - | |||
| - | Capture frame from '' | ||
| - | |||
| - | ```shell | ||
| - | v4l2-ctl -d / | ||
| - | ``` | ||
| - | |||
| - | Capture frame from '' | ||
| - | |||
| - | ```shell | ||
| - | v4l2-ctl -d / | ||
| - | ``` | ||
| - | |||
| - | Capture frame from '' | ||
| - | |||
| - | ```shell | ||
| - | v4l2-ctl -d / | ||
| - | ``` | ||
| - | |||
| - | <tabbox Other version> | ||
| Capture frame from '' | Capture frame from '' | ||
| Line 208: | Line 187: | ||
| v4l2-ctl -d / | v4l2-ctl -d / | ||
| ``` | ``` | ||
| - | |||
| - | </ | ||
| It will capture a '' | It will capture a '' | ||
| Line 220: | Line 197: | ||
| ``` | ``` | ||
| + | |||
| + | ==== Camera Interfaces Performance ==== | ||
| + | |||
| + | <tabbox IMX415> | ||
| + | | ^ CAM2 2lane, connect one camera separately ^ CAM2 2lane, connect three camera simultaneously ^ CAM2 4lane, connect one camera separately ^ CAM2 4lane, connect three camera simultaneously ^ CMA2 4lane, connect 2 cameras to CAM3 and CAM2 separately ^ | ||
| + | ^ CAM1 | 4K@30fps | ||
| + | ^ CAM2 | 4K@30fps | ||
| + | ^ CAM3 | 4K@60fps | ||
| + | <tabbox OS08A10> | ||
| + | | ^ CAM2 2lane, connect one camera separately ^ CAM2 2lane, connect three camera simultaneously ^ CAM2 4lane, connect one camera separately ^ CAM2 4lane, connect three camera simultaneously ^ CMA2 4lane, connect 2 cameras to CAM3 and CAM2 separately ^ | ||
| + | ^ CAM1 | 4K@30fps | ||
| + | ^ CAM2 | 4K@30fps | ||
| + | ^ CAM3 | 4K@60fps | ||
| + | <tabbox IMX585> | ||
| + | | ^ CAM2 2lane, connect one camera separately ^ CAM2 2lane, connect three camera simultaneously ^ CAM2 4lane, connect one camera separately ^ CAM2 4lane, connect three camera simultaneously ^ CMA2 4lane, connect 2 cameras to CAM3 and CAM2 separately ^ | ||
| + | ^ CAM1 | 4K@30fps | ||
| + | ^ CAM2 | 4K@30fps | ||
| + | ^ CAM3 | 4K@60fps | ||
| + | <tabbox IMX678> | ||
| + | | ^ CAM2 2lane, connect one camera separately ^ CAM2 2lane, connect three camera simultaneously ^ CAM2 4lane, connect one camera separately ^ CAM2 4lane, connect three camera simultaneously ^ CMA2 4lane, connect 2 cameras to CAM3 and CAM2 separately ^ | ||
| + | ^ CAM1 | 4K@30fps | ||
| + | ^ CAM2 | 4K@30fps | ||
| + | ^ CAM3 | 4K@60fps | ||
| + | |||
| + | </ | ||
| ===== Android ===== | ===== Android ===== | ||
Last modified: 2024/10/29 05:43 by jacobe