Khadas Docs

Amazing Khadas, always amazes you!

User Tools

Site Tools

Home / products / sbc / edge2 / add-ons / edge2-mipi-camera
products:sbc:edge2:add-ons:edge2-mipi-camera

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
products:sbc:edge2:add-ons:edge2-mipi-camera [2023/07/05 01:55]
nick 		products:sbc:edge2:add-ons:edge2-mipi-camera [2024/01/10 04:29]
jacobe
Line 1: Line 1:
 +{{indexmenu_n>40}}
 +
  
 ====== Edge2 MIPI Camera Usage ====== ====== Edge2 MIPI Camera Usage ======
Line 12: Line 14:
 You can find the video nodes from the table below. You can find the video nodes from the table below.
  
-|        ^  Video Node    ^ +|        ^  Video Node(5.10.66)    ^  Video Node(5.10.160)   ^ 
-^  CAM1  |  /dev/video33  | +^  CAM1  |  /dev/video33  |  /dev/video42  | 
-^  CAM2  |  /dev/video24  | +^  CAM2  |  /dev/video24  |  /dev/video33  | 
-^  CAM3  |  /dev/video42  |+^  CAM3  |  /dev/video42  |  /dev/video51  |
  
 ==== Record Video with Gstreamer ==== ==== Record Video with Gstreamer ====
 +
 +<tabbox kernel 5.10.66>
  
 Record video from ''CAM1'': Record video from ''CAM1'':
  
 ```shell ```shell
-gst-launch-1.0 v4l2src device=/dev/video33 io-mode=mmap num-buffers=300 ! mpph264enc ! h264parse ! qtmux ! filesink location=/tmp/video33.mp4+gst-launch-1.0 v4l2src device=/dev/video33 io-mode=dmabuf num-buffers=300 ! mpph264enc ! h264parse ! qtmux ! filesink location=/tmp/video33.mp4
 ``` ```
  
Line 28: Line 32:
  
 ```shell ```shell
-gst-launch-1.0 v4l2src device=/dev/video24 io-mode=mmap num-buffers=300 ! mpph264enc ! h264parse ! qtmux ! filesink location=/tmp/video24.mp4+gst-launch-1.0 v4l2src device=/dev/video24 io-mode=dmabuf num-buffers=300 ! mpph264enc ! h264parse ! qtmux ! filesink location=/tmp/video24.mp4
 ``` ```
  
Line 34: Line 38:
  
 ```shell ```shell
-gst-launch-1.0 v4l2src device=/dev/video42 io-mode=mmap num-buffers=300 ! mpph264enc ! h264parse ! qtmux ! filesink location=/tmp/video42.mp4+gst-launch-1.0 v4l2src device=/dev/video42 io-mode=dmabuf num-buffers=300 ! mpph264enc ! h264parse ! qtmux ! filesink location=/tmp/video42.mp4
 ``` ```
 +
 +<tabbox Other version>
 +
 +Record video from ''CAM1'':
 +
 +```shell
 +gst-launch-1.0 v4l2src device=/dev/video42 io-mode=dmabuf num-buffers=300 ! mpph264enc ! h264parse ! qtmux ! filesink location=/tmp/video33.mp4
 +```
 +
 +Record video from ''CAM2'':
 +
 +```shell
 +gst-launch-1.0 v4l2src device=/dev/video33 io-mode=dmabuf num-buffers=300 ! mpph264enc ! h264parse ! qtmux ! filesink location=/tmp/video24.mp4
 +```
 +
 +Record video from ''CAM3'':
 +
 +```shell
 +gst-launch-1.0 v4l2src device=/dev/video51 io-mode=dmabuf num-buffers=300 ! mpph264enc ! h264parse ! qtmux ! filesink location=/tmp/video42.mp4
 +```
 +</tabbox>
 +
 /* /*
 ==== Record Video with OpenCV ==== ==== Record Video with OpenCV ====
Line 116: Line 142:
 ``` ```
 */ */
-==== Capture Frame with V4L2 API ====+==== Capture Frame with V4L2 Utils ====
  
 Follow the steps below to install ''v4l-utils'': Follow the steps below to install ''v4l-utils'':
Line 124: Line 150:
 sudo apt install v4l-utils sudo apt install v4l-utils
 ``` ```
 +
 +<tabbox kernel 5.10.66>
  
 Capture frame from ''CAM1'': Capture frame from ''CAM1'':
Line 142: Line 170:
 v4l2-ctl -d /dev/video42 --set-fmt-video=width=3840,height=2160,pixelformat=NV12 --stream-mmap=3 --stream-skip=3 --stream-to=/tmp/data42.yuv --stream-count=1 --stream-poll v4l2-ctl -d /dev/video42 --set-fmt-video=width=3840,height=2160,pixelformat=NV12 --stream-mmap=3 --stream-skip=3 --stream-to=/tmp/data42.yuv --stream-count=1 --stream-poll
 ``` ```
 +
 +<tabbox Other version>
 +
 +Capture frame from ''CAM1'':
 +
 +```shell
 +v4l2-ctl -d /dev/video42 --set-fmt-video=width=3840,height=2160,pixelformat=NV12 --stream-mmap=3 --stream-skip=3 --stream-to=/tmp/data42.yuv --stream-count=1 --stream-poll
 +```
 +
 +Capture frame from ''CAM2'':
 +
 +```shell
 +v4l2-ctl -d /dev/video33 --set-fmt-video=width=3840,height=2160,pixelformat=NV12 --stream-mmap=3 --stream-skip=3 --stream-to=/tmp/data33.yuv --stream-count=1 --stream-poll
 +```
 +
 +Capture frame from ''CAM3'':
 +
 +```shell
 +v4l2-ctl -d /dev/video51 --set-fmt-video=width=3840,height=2160,pixelformat=NV12 --stream-mmap=3 --stream-skip=3 --stream-to=/tmp/data51.yuv --stream-count=1 --stream-poll
 +```
 +
 +</tabbox>
  
 It will capture a ''3840x2160 NV12'' format frame to file ''/tmp/dataXX.yuv''. It will capture a ''3840x2160 NV12'' format frame to file ''/tmp/dataXX.yuv''.
Last modified: 2024/01/11 01:51 by jacobe

Page Tools

Khadas Site

Khadas Community

Khadas GitHub

Khadas Downloads