Differences

This shows you the differences between two versions of the page.

--- products:sbc:edge1:install-os:install-os-into-emmc-via-usb-tool [2022/09/28 02:48]
nick
+++ products:sbc:edge1:install-os:install-os-into-emmc-via-usb-tool [2022/09/30 04:22] (current)
nick
@@ Line 12: / Line 12: @@
 ==== Preparation ====
-Dowload the [[https://dl.khadas.com/Tools/DriverAssitant_v4.91.zip|DriverAssitant]],[[https://dl.khadas.com/Tools/AndroidTool_Release_en_v2.71.zip|FlashTool]] and extract it to somewhere.
+Dowload the [[dl>products/edge/usb_driver/driverassitant_v4.91.zip|DriverAssitant]],[[dl>products/edge/tool/androidtool_release_en_v2.71.zip|FlashTool]] and extract it to somewhere.
 ==== Install USB Drivers ====
@@ Line 33: / Line 33: @@
 ===== Install on Ubuntu PC =====
-<WRAP important >
+{{page>products/sbc/common/install-os/install-os-into-emmc-on-ubuntu&noheader}}
-Tools were only verified to function properly on Ubuntu. No guarantees were made for other Linux distributions!
-</WRAP>
-==== Preparation ====
-Install the dependencies.
-```shell
-$ sudo apt update
-$ sudo apt install libusb-dev git parted
-```
-==== Download the Tool ====
-[[kg>utils|Flash tools for Ubuntu/Linux]].
-```shell
-$ git clone https://github.com/khadas/utils
-```
-Or just pull it (if you have already cloned this repository).
-```shell
-$ cd /path/to/utils
-$ git pull
-```
-==== Install the Flash Tool ====
-You need to install USB rules and create some links.
-```shell
-$ cd /path/to/utils
-$ sudo ./INSTALL
-```
-You will see this print-out if it was successful.
-```txt
-Installing Amlogic flash-tool...
-===============================================
-Host PC: Ubuntu 16.04
-===============================================
-Installing USB rules...
-[sudo] password for User:
-Installing flash-tool...
-Done!
-Installing Rockchip flash-tool...
-===============================================
-Host PC: Ubuntu 16.04
-===============================================
-Installing USB rules...
-Installing flash-tool...
-Done!
-Installing Khadas burn-tool...
-Done!
-```
-<wrap important >
-Root privilege is required.
-</wrap>
-==== Check the USB Driver ====
-You must now put your board into [[boot-into-upgrade-mode| Upgrade Mode]].
-Check to see if Ubuntu has detected your board as an attached USB device.
-```shell
-$ lsusb | grep Rockchip
-Bus 003 Device 117: ID 2207:350b Fuzhou Rockchip Electronics Company
-```
-The message above means that your board is connected and recogized by Ubuntu.
-==== Install the OS ====
-```shell
-$ burn-tool -v rk -i /path/to/image
-```
-In successful case we will see these terminal logs:
-```txt
-Try to burn Rockchip image...
-Burn to eMMC...
-Rockchip Android image (or linux image compatible with AndroidTool one image burning) found!
-Try to burn Rockchip image...
-Using /storage/code/git/utils/rk-flash-tool/tools/Linux_Upgrade_Tool/config.ini
-Program Log will save in the /home/nick/upgrade_tool/log/
-Loading firmware...
-Support Type:RK3588	FW Ver:1.0.00	FW Time:2022-04-08 10:31:34
-Loader ver:1.01	Loader Time:2022-04-08 10:23:02
-Upgrade firmware ok.
-Time elapsed: 1 minute(s).
-Done!
-```
-For more information please refer to [[kg>utils/tree/master/rk-flash-tool|rk-flash-tool docs]].
-==== Uninstall the Flash Tool ====
-```shell
-$ cd /path/to/utils
-$ sudo ./UNINSTALL
-```

Khadas Docs

User Tools

Site Tools

Differences

Page Tools