Differences

This shows you the differences between two versions of the page.

--- products:sbc:edge-2l:install-os:install-os-into-emmc-via-usb-tool [2025/11/27 03:44]
gray ↷ Page moved from local:users:start:install-os:install-os-into-emmc-via-usb-tool to local:users:gray:products:sbc:edge-2l:install-os:install-os-into-emmc-via-usb-tool
+++ products:sbc:edge-2l:install-os:install-os-into-emmc-via-usb-tool [2026/05/11 03:18] (current)
nick
@@ Line 2: / Line 2: @@
-====== Edge-2L Install OS into eMMC via USB Flash Tool ======
+====== Edge-2L install OS into eMMC via USB flash tool ======
 ===== Introduction =====
-This document mainly introduces how to use the USB flash tool to install the OS image to Khadas SBC onboard eMMC.
+This document explains how to use the USB flash tool to install an OS image to the onboard eMMC storage of a Khadas Edge-2L SBC.
 ===== Install on Windows PC =====
@@ Line 12: / Line 12: @@
 ==== Preparation ====
-Dowload [[dl>products/edge-2l/tools/rkdevtool_release_v3.28.zip|rkdevtool_release_v3.28]] and [[dl>products/edge-2l/tools/driver-assitant_v5.13.zip|driver-assitant_v5.13]] then extract them to somewhere.
+Download the following tools and extract them to a convenient location on your PC:
+  * [[dl>products/edge-2l/tools/rkdevtool-release-v3.37.zip|rkdevtool-release-v3.37]]
+  * [[dl>products/edge-2l/tools/driver-assitant-v5.13.zip|driver-assitant-v5.13]]
-==== Install USB Drivers ====
+==== Install USB drivers ====
-  - Enter ''driver-assitant'' folder, then run ''DriverInstall.exe''.
-  - Double click ''Unistall'' to uninstall.
-  - Double click ''Install'' to install.
-{{products:sbc:edge-2l:install-os:driver-install.webp}}
+  - Navigate to the extracted driver-assitant folder.
+  - Run ''DriverInstall.exe''.
+  - Double-click ''Uninstall'' to remove any previous drivers.
+  - Double-click ''Install'' to install the necessary USB drivers.
+{{products:sbc:edge2:install-os:driver-install.webp}}
 ==== Install the OS ====
-  - Run ''RKDevTool.exe''. Then clink ''Upgrade Firmware''->''Firmware'' to select a image.
+  - Run ''RKDevTool.exe''.
-  - Connect Edge and PC with a USB-C data-cable (Edge will power-on automatically).
+  - Click ''Upgrade Firmware''->''Firmware'' and select your OS image file.
-  - Put your board into [[products/sbc/edge-2l/install-os/boot-into-upgrade-mode|Upgrade Mode]].
+  - Connect the Edge-2L to your PC using a USB-C data cable. The board will power on automatically.
-  - Your PC should have found your Edge device as a connected USB device.
+  - Put your Edge-2L board into [[products/sbc/edge-2l/install-os/boot-into-upgrade-mode|Upgrade Mode]].
-  - Now all you need to do is to click the ''Upgrade'' button of the tool and wait for upgrading to complete.
+  - Your PC should detect the board as a connected USB device.
+  - Click the Upgrade button in the tool and wait for the process to complete.
-{{products:sbc:edge-2l:install-os:flash-image.webp}}
+{{products:sbc:edge2:install-os:flash-image.webp}}
 ===== Install on Ubuntu PC =====

Khadas Docs

User Tools

Site Tools

Differences

Page Tools