Differences

This shows you the differences between two versions of the page.

--- products:sbc:edge-2l:install-os:install-os-into-emmc-via-usb-tool [2025/11/20 01:53]
gray created
+++ products:sbc:edge-2l:install-os:install-os-into-emmc-via-usb-tool [2026/05/11 03:18] (current)
nick
@@ Line 1: / Line 1: @@
-{{indexmenu_n>30}}
+{{indexmenu_n>20}}
-====== Edge-2L Install OS into External Storage ======
+====== Edge-2L install OS into eMMC via USB flash tool ======
-{{page>products:sbc:common:install-os:install-os-into-external-storage&noheader}}
+===== Introduction =====
+This document explains how to use the USB flash tool to install an OS image to the onboard eMMC storage of a Khadas Edge-2L SBC.
+===== Install on Windows PC =====
+==== Preparation ====
+Download the following tools and extract them to a convenient location on your PC:
+  * [[dl>products/edge-2l/tools/rkdevtool-release-v3.37.zip|rkdevtool-release-v3.37]]
+  * [[dl>products/edge-2l/tools/driver-assitant-v5.13.zip|driver-assitant-v5.13]]
+==== Install USB drivers ====
+  - Navigate to the extracted driver-assitant folder.
+  - Run ''DriverInstall.exe''.
+  - Double-click ''Uninstall'' to remove any previous drivers.
+  - Double-click ''Install'' to install the necessary USB drivers.
+{{products:sbc:edge2:install-os:driver-install.webp}}
+==== Install the OS ====
+  - Run ''RKDevTool.exe''.
+  - Click ''Upgrade Firmware''->''Firmware'' and select your OS image file.
+  - Connect the Edge-2L to your PC using a USB-C data cable. The board will power on automatically.
+  - Put your Edge-2L board into [[products/sbc/edge-2l/install-os/boot-into-upgrade-mode|Upgrade Mode]].
+  - Your PC should detect the board as a connected USB device.
+  - Click the Upgrade button in the tool and wait for the process to complete.
+{{products:sbc:edge2:install-os:flash-image.webp}}
+===== Install on Ubuntu PC =====
+{{page>products/sbc/common/install-os/install-os-into-emmc-on-ubuntu&noheader}}

Khadas Docs

User Tools

Site Tools

Differences

Page Tools