This is an old revision of the document!

Edge-2L Hardware Documentation

Edge-2L Interfaces

	Component	Purpose
1	USB-A	USB 3.1, blue colour
2	USB-C	USB 3.1 & Display Port
3	HDMI	Type-A Female, up to 8K@60Hz, HDCP 2.3
4	USB-C	Only for power delivery
5	USB-A	USB 2.0, black colour
6	RGB LED1	Status indicator LED
7	RTC Battery	RTC battery for the real time clock
8	Reset Button	Force reboot your Edge-2L
9	Function Button	Press this 3 times in 2 seconds to enter MaskROM mode
A	Power Button	This button turns on your Edge-2L
B	Camera2	30-pin, 0.5mm pitch, 4-lane, dual cameras, 16MP 30FPS image signal processing
C	Camera1	30-pin, 0.5mm pitch, 4-lane, dual cameras, 16MP 30FPS image signal processing
D	G-Sensor	3-axis accelerometer
E	MHF4 Antenna	Wi-Fi and Bluetooth antenna connector
F	SPI Flash	Flash memory module that interfaces over SPI
G	PWM Fan Header	4-wire fan header utilising pulse width modulation
H	RGB LED2	Status indicator LED

	Component	Purpose
1	Pogo pins	Debug and USB hub pads
2	E-ink	49-pin, 0.3mm pitch dual-row FPC connector for E-ink display
3	DSI	40-pin, 0.5mm pitch FPC connector for 4-lane 1080P displays && TP touch input
4	IO2	30-pin, 0.5mm pitch,connect the expansion board
5	IO1	30-pin, 0.5mm pitch, connect the expansion board
6	XPWR pads	Extennal POWER key pads

Reset	Function	Power	Purpose
x			Force Reboot Edge-2L
	x		Enter Upgrade Mode (TST)
		x	Power On/Wake Up Edge-2L
x		x	Enter Upgrade Mode (KEYS)

2026/03/24 03:26 · gray