Differences

This shows you the differences between two versions of the page.

--- products:sbc:common:development:setup-serial-tool [2022/09/28 08:32]
nick
+++ products:sbc:common:development:setup-serial-tool [2024/08/18 22:18] (current)
nick
@@ Line 15: / Line 15: @@
 You can connect your serial tool to the board GPIO pins, referring to the following diagram，
+^ Serial tools pin ^ GPIO board header pin ^ Name ^
+| ''GND'' |  ''17''  | |
+| ''TXD'' |  ''18''  | ''Linux_Rx'' |
+| ''RXD'' |  ''19''  | ''Linux_Tx'' |
+| ''VCC(3.3V)'' |  ''20''  | |
+/*
   * Tool Pin ''GND'' <-> ''Pin17'' of VIM’s GPIO
   * Tool Pin ''TXD'' <-> ''Pin18'' of VIM’s GPIO ''Linux_Rx''
   * Tool Pin ''RXD'' <-> ''Pin19'' of VIM’s GPIO ''Linux_Tx''
   * Tool Pin ''VCC'' <-> ''Pin20'' of VIM’s GPIO
+*/
 Insert the USB port into your computer.
@@ Line 153: / Line 160: @@
 Install the CH340 driver.
-  - Download the [[https://dl.khadas.com/Tools/CH34x_Install_Windows_v3_4.zip|driver]].
+  - Download the [[dl>tools/ch34x_install_windows_v3_4.zip|driver]].
   - Unzip the compressed file.
   - Run the installer.

Khadas Docs