Khadas Docs

Amazing Khadas, always amazes you!

User Tools

Site Tools


products:sbc:common:development:fastboot

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
products:sbc:common:development:fastboot [2024/08/06 04:53]
nick
products:sbc:common:development:fastboot [2024/08/06 05:04] (current)
nick
Line 10: Line 10:
  
   - Connect the PC host and board with USB cable.   - Connect the PC host and board with USB cable.
-  - Refer this [[setup-serial-tool|guide]] to setup your serial tool.+  - Refer the documentation ([[setup-serial-tool| VIM1/2/3/3L/4/1S/Edge1 ]] / [[products:sbc:edge2/development:setup-serial-tool| Edge2 ]]) to setup your serial tool.
   - Once again, make sure you've done the correct connections and setup.   - Once again, make sure you've done the correct connections and setup.
   - Hit ''Enter'' keys at the moment of bootup to stop autoboot. This step will let the board boot into U-Boot Mode.   - Hit ''Enter'' keys at the moment of bootup to stop autoboot. This step will let the board boot into U-Boot Mode.
Last modified: 2024/08/06 04:53 by nick