Differences

This shows you the differences between two versions of the page.

--- products:sbc:common:applications:gpio:wiringpi [2022/07/08 05:18]
frank
+++ products:sbc:common:applications:gpio:wiringpi [2023/06/25 23:24] (current)
nick
@@ Line 3: / Line 3: @@
 ===== Introduction =====
-This document mainly introduces the WiringPi. You will learn how to use the WiringPi to control the GPIO on the 40-Pin Header.
+WiringPi is a C++ library for Raspberry Pi, we port it to Khadas SBC, With this library you can use many of the functionalities provided by the GPIO header: digital pins, SPI, I2C, UART, etc.
-<WRAP info >
-WiringPi is a C++ library for Raspberry Pi. With this library you can use many of the functionalities provided by the GPIO header: digital pins, SPI, I2C, UART, etc.
-</WRAP>
 ===== WiringPi Instructions =====
@@ Line 20: / Line 16: @@
 ''wPi'' –> WiringPi number \\
 ''Mode'' –> GPIO Mode ,''ALT'' mean that this pin defined as a special function \\
-''V'' –> 1:HIGH 0:LOW \\
+''V'' –> 1 - HIGH, 0 - LOW \\
-''PU/PD'' –> ''PU'':pull up ''PD'':pull down ''DSBLD'':disabled ''PU''/''PD''
+''PU/PD'' –> ''PU'' - pull up, ''PD'' - pull down, ''DSBLD'' - disabled
 ==== Using via Command Line ====
@@ Line 40: / Line 36: @@
 ```
-==== Using via C program ====
+==== Using via C Program ====
 The test program changes the level value every 5S.

Khadas Docs