Differences

This shows you the differences between two versions of the page.

--- products:sbc:common:applications:gpio:uart [2023/11/07 05:08]
nick [Table]
+++ products:sbc:common:applications:gpio:uart [2023/11/07 05:09] (current)
nick [Enable UART]
@@ Line 28: / Line 28: @@
 ```shell
 overlays=pwm_ao_a pwm_f uart3
+```
+After reboot, you will see the UART device node.
+```shell
+$ ls /dev/ttyS3
+/dev/ttyS3
+```
+<tabbox VIM3 with 5.15 kernel>
+Edit ''/boot/dtb/amlogic/kvim3.dtb.overlay.env'' to add uart node to ''fdt_overlays'' node if it doesn't exist.
+e.g. Enable ''UART_C'', you need to add ''uart3'' to node ''fdt_overlays'' if it doesn't exist.
+```shell
+fdt_overlays=uart3
+```
+After reboot, you will see the UART device node.
+```shell
+$ ls /dev/ttyS3
+/dev/ttyS3
+```
+<tabbox VIM3L with 5.15 kernel>
+Edit ''/boot/dtb/amlogic/kvim3l.dtb.overlay.env'' to add uart node to ''fdt_overlays'' node if it doesn't exist.
+e.g. Enable ''UART_C'', you need to add ''uart3'' to node ''fdt_overlays'' if it doesn't exist.
+```shell
+fdt_overlays=uart3
 ```

Khadas Docs