Khadas Docs

Amazing Khadas, always amazes you!

User Tools

Site Tools

Home / products / sbc / common / applications / gpio / spi
products:sbc:common:applications:gpio:spi

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
products:sbc:common:applications:gpio:spi [2022/07/13 23:56]
nick [Table] 		products:sbc:common:applications:gpio:spi [2023/11/07 05:07] (current)
nick [Enable SPI]
Line 1: Line 1:
-====== SPI ====== 
  
-===== Introduction =====+===== SPI Reference table =====
  
-This document mainly introduces the usage of SPI on [[products:sbc:common:applications:gpio:40pin-header|40-Pin Header]].+|           ^  SPI    ^ Pin  ^ Pin name     ^  GPIO name  ^  DT overlay node  ^  Device node     ^ 
 +^  VIM3/3L  |  SPI_B  |  15  | SPIB_SS      |  GPIOH_6    |  spi1             |  /dev/spidev1.1  | 
 +| :::       | :::     |  16  | SPIB_SCLK    |  GPIOH_7    | :::               | :::              | 
 +| :::       | :::     |  35  | SPIB_MISO    |  GPIOH_5    | :::               | :::              | 
 +| :::       | :::     |  37  | SPIB_MOSI    |  GPIOH_4    | :::               | :::              | 
 +^  VIM4     |  SPI_A  |  25  |  SPI_A_SCLK  |  GPIOT_20   |  spi0             |  /dev/spidev1.0  | 
 +| :::       | :::     |  26  |  SPI_A_SS0   |  GPIOT_21   | :::               | :::              | 
 +| :::       | :::     |  36  |  SPI_A_MOSI  |  GPIOT_18   | :::               | :::              | 
 +| :::       | :::     |  37  |  SPI_A_MISO  |  GPIOT_19   | :::               | :::              | 
 +^  VIM1S    |  SPI_A  |  29  |  SPI_A_MOSI  |  GPIOZ_1    | :::               | :::              | 
 +| :::       | :::     |  31  |  SPI_A_CLK   |  GPIOZ_2    | :::               | :::              | 
 +| :::       | :::     |  32  |  SPI_A_MISO  |  GPIOZ_0    | :::               | :::              | 
 +| :::       | :::     |  33  |  SPI_A_SS0   |  GPIOZ_3    | :::               | :::              |
  
-===== SPI Information ===== +===== Enable SPI =====
- +
-|           ^  SPI    ^  PIN            ^ GPIO Name  ^ GPIO Number  ^  DT Overlays Node  ^  Device Node     ^ +
-^  VIM3/3L  |  SPI_B  |  15(SPIB_SS)    |  GPIOH_6   |  433         |  spi1              |  /dev/spidev1.1  | +
-| :::       | :::     |  16(SPIB_SCLK)  |  GPIOH_7   |  434         | :::                | :::              | +
-| :::       | :::     |  35(SPIB_MISO)  |  GPIOH_5   |  432         | :::                | :::              | +
-| :::       | :::     |  37(SPIB_MOSI)  |  GPIOH_4   |  431         | :::                | :::              | +
-^  VIM4     |         |                 |            |              |                    |                  | +
- +
- +
-===== Enabel SPI =====+
  
 In order to use the SPI, you need to enable the SPI function via [[products:sbc:common:configurations:device-tree-overlay|Device Tree Overlay]]. In order to use the SPI, you need to enable the SPI function via [[products:sbc:common:configurations:device-tree-overlay|Device Tree Overlay]].
  
-<tabbox VIM1/2/3/3L/Edge1>+<tabbox VIM3/3L/Edge1>
  
 Edit ''/boot/env.txt'' to add the SPI node to ''overlays'' node if it doesn't exist. Edit ''/boot/env.txt'' to add the SPI node to ''overlays'' node if it doesn't exist.
Line 40: Line 41:
 /dev/spidev1.1 /dev/spidev1.1
 ``` ```
 +
 +<tabbox VIM3 with 5.15 kernel>
 +
 +Edit ''/boot/dtb/amlogic/kvim3.dtb.overlay.env'' to add spi node to ''fdt_overlays'' node if it doesn't exist.
 +
 +
 +e.g. Enable ''SPI_B'', you need to add ''spi1'' to node ''fdt_overlays'' if it doesn't exist.
 +
 +```shell
 +fdt_overlays=spi1
 +
 +```
 +
 +After reboot, you will see the SPI device node.
 +
 +<tabbox VIM3L with 5.15 kernel>
 +
 +Edit ''/boot/dtb/amlogic/kvim3l.dtb.overlay.env'' to add spi node to ''fdt_overlays'' node if it doesn't exist.
 +
 +
 +e.g. Enable ''SPI_B'', you need to add ''spi1'' to node ''fdt_overlays'' if it doesn't exist.
 +
 +```shell
 +fdt_overlays=spi1
 +
 +```
 +
 +After reboot, you will see the SPI device node.
  
 <tabbox VIM4> <tabbox VIM4>
  
-TODO.+Edit ''/boot/dtb/amlogic/kvim4.dtb.overlay.env'' to add spi node to ''fdt_overlays'' node if it doesn't exist.
  
-</tabbox> 
  
 +e.g. Enable ''SPI_A'', you need to add ''spi0'' to node ''fdt_overlays'' if it doesn't exist.
  
-===== Disable SPI to Use GPIO =====+```shell 
 +fdt_overlays=spi0
  
-If you want to use normal GPIO instead of SPI, you can remove the SPI node in device tree overlays configration file. +```
  
 +After reboot, you will see the SPI device node.
  
-===== Demo Source Code =====+```shell 
 +$ ls /dev/spidev1.0  
 +/dev/spidev1.0 
 +``` 
 +<tabbox VIM1S>
  
-**Get test code.**+Edit ''/boot/dtb/amlogic/kvim1s.dtb.overlay.env'' to add spi node to ''fdt_overlays'' node if it doesn't exist. 
 + 
 + 
 +e.g. Enable ''SPI_A'', you need to add ''spi0'' to node ''fdt_overlays'' if it doesn't exist. 
 + 
 +```shell 
 +fdt_overlays=spi0 
 + 
 +``` 
 + 
 +After reboot, you will see the SPI device node. 
 + 
 +```shell 
 +$ ls /dev/spidev1.0  
 +/dev/spidev1.0 
 +``` 
 + 
 +</tabbox> 
 + 
 +===== Disable SPI ===== 
 + 
 +If you want to use normal GPIO instead of SPI, you can remove the SPI node in [[products:sbc:common:configurations:device-tree-overlay|Device Tree Overlay]].  
 + 
 + 
 +===== Demo Source Code =====
  
 ```c spidev_test.c ```c spidev_test.c
Line 90: Line 149:
 } }
  
-static const char *device = "/dev/spidev1.1";+static const char *device = "/dev/spidev1.0";
 static uint32_t mode; static uint32_t mode;
 static uint8_t bits = 8; static uint8_t bits = 8;
Line 539: Line 598:
 ``` ```
  
-**Compile test code.**+Compile test code:
  
 ```shell ```shell
Line 545: Line 604:
 ``` ```
  
-===== Demonstrate ===== +===== Test demonstration =====
  
-**Prepare a text file.**+Prepare input text file:
  
 ```shell ```shell
Line 554: Line 612:
 ``` ```
  
-**Run ''spidev_test''.**+Connect PIN36(MOSI), PIN37(MISO) then run ''spidev_test'':
  
 ```shell ```shell
Line 563: Line 621:
 ``` ```
  
-**Check output data.**+Check output data:
  
 ```shell ```shell
Last modified: 2022/07/13 23:56 by nick

Page Tools

Khadas Site

Khadas Community

Khadas GitHub

Khadas Downloads