Khadas Docs

Amazing Khadas, always amazes you!

User Tools

Site Tools

Home / products / sbc / common / applications / gpio / spi
products:sbc:common:applications:gpio:spi

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
Last revision Both sides next revision
products:sbc:common:applications:gpio:spi [2022/07/13 05:29]
nick 		products:sbc:common:applications:gpio:spi [2023/11/07 05:07]
nick [Enable SPI]
Line 1: Line 1:
-====== SPI ====== 
  
-===== Introduction =====+===== SPI Reference table =====
  
-This document mainly introduces the usage of SPI on [[products:sbc:common:applications:gpio:40pin-header|40-Pin Header]].+|           ^  SPI    ^ Pin  ^ Pin name     ^  GPIO name  ^  DT overlay node  ^  Device node     ^ 
 +^  VIM3/3L  |  SPI_B  |  15  | SPIB_SS      |  GPIOH_6    |  spi1             |  /dev/spidev1.1  | 
 +| :::       | :::     |  16  | SPIB_SCLK    |  GPIOH_7    | :::               | :::              | 
 +| :::       | :::     |  35  | SPIB_MISO    |  GPIOH_5    | :::               | :::              | 
 +| :::       | :::     |  37  | SPIB_MOSI    |  GPIOH_4    | :::               | :::              | 
 +^  VIM4     |  SPI_A  |  25  |  SPI_A_SCLK  |  GPIOT_20   |  spi0             |  /dev/spidev1.0  | 
 +| :::       | :::     |  26  |  SPI_A_SS0   |  GPIOT_21   | :::               | :::              | 
 +| :::       | :::     |  36  |  SPI_A_MOSI  |  GPIOT_18   | :::               | :::              | 
 +| :::       | :::     |  37  |  SPI_A_MISO  |  GPIOT_19   | :::               | :::              | 
 +^  VIM1S    |  SPI_A  |  29  |  SPI_A_MOSI  |  GPIOZ_1    | :::               | :::              | 
 +| :::       | :::     |  31  |  SPI_A_CLK   |  GPIOZ_2    | :::               | :::              | 
 +| :::       | :::     |  32  |  SPI_A_MISO  |  GPIOZ_0    | :::               | :::              | 
 +| :::       | :::     |  33  |  SPI_A_SS0   |  GPIOZ_3    | :::               | :::              |
  
-===== SPI Information ===== +===== Enable SPI =====
- +
-|           ^  SPI   ^  PIN & GPIO(#number)                                                                                                            ^  DT Overlays Node  ^  Device Node     ^ +
-^  VIM3/3L  |  SPIB  |  SPIB_SS(15) - GPIOH_6 (#433)\\ SPIB_SCLK(16) - GPIOH_7 (#434)\\ SPIB_MISO(35) - GPIOH_5(#432)\\ SPIB_MOSI(37) - GPIOH_4(#431)  |  spi1              |  /dev/spidev1.1  | +
-^  VIM4     |        |                                                                                                                                 |                    |                  | +
- +
- +
-===== Enabel SPI =====+
  
 In order to use the SPI, you need to enable the SPI function via [[products:sbc:common:configurations:device-tree-overlay|Device Tree Overlay]]. In order to use the SPI, you need to enable the SPI function via [[products:sbc:common:configurations:device-tree-overlay|Device Tree Overlay]].
  
-<tabbox VIM1/2/3/3L/Edge1>+<tabbox VIM3/3L/Edge1>
  
 Edit ''/boot/env.txt'' to add the SPI node to ''overlays'' node if it doesn't exist. Edit ''/boot/env.txt'' to add the SPI node to ''overlays'' node if it doesn't exist.
  
-Take VIM3 as an example to enable ''SPIB'', you need to add ''spi1'' node to ''overlays'' node if it doesn't exist.+Take VIM3 as an example to enable ''SPI_B'', you need to add ''spi1'' node to ''overlays'' node if it doesn't exist.
  
 ```shell ```shell
Line 33: Line 37:
 After reboot, you will see the spi device node. After reboot, you will see the spi device node.
  
 +```shell
 $ ls /dev/spidev1.1 $ ls /dev/spidev1.1
 /dev/spidev1.1 /dev/spidev1.1
 +```
  
-<tabbox VIM4>+<tabbox VIM3 with 5.15 kernel>
  
-TODO.+Edit ''/boot/dtb/amlogic/kvim3.dtb.overlay.env'' to add spi node to ''fdt_overlays'' node if it doesn't exist.
  
-</tabbox> 
  
 +e.g. Enable ''SPI_A'', you need to add ''spi0'' to node ''fdt_overlays'' if it doesn't exist.
  
-===== Disable I2C to Use GPIO =====+```shell 
 +fdt_overlays=spi0
  
-If you want to use normal GPIO instead of I2C, you can remove the I2C node in device tree overlays configration file. +```
  
 +After reboot, you will see the SPI device node.
  
 +<tabbox VIM3L with 5.15 kernel>
  
-===== System Configuration =====+Edit ''/boot/dtb/amlogic/kvim3l.dtb.overlay.env'' to add spi node to ''fdt_overlays'' node if it doesn't exist. 
 + 
 + 
 +e.g. Enable ''SPI_A'', you need to add ''spi0'' to node ''fdt_overlays'' if it doesn't exist.
  
-The default SPI is disabled. If you need to use SPI, you can enable it through the overlays function. 
 ```shell ```shell
-$ sudo vim /boot/env.txt+fdt_overlays=spi0 
 ``` ```
-Modify the overlays part, remove ''pwm_f'' and ''uart3'', and open SPI. 
  
-```diff +After reboot, you will see the SPI device node. 
-- overlays=uart3 pwm_f i2c3 os08a10 + 
-+ overlays=i2c3 os08a10 spi1+<tabbox VIM4> 
 + 
 +Edit ''/boot/dtb/amlogic/kvim4.dtb.overlay.env'' to add spi node to ''fdt_overlays'' node if it doesn't exist. 
 + 
 + 
 +e.g. Enable ''SPI_A'', you need to add ''spi0'' to node ''fdt_overlays'' if it doesn't exist. 
 + 
 +```shell 
 +fdt_overlays=spi0 
 ``` ```
  
-Reboot to effect.+After reboot, you will see the SPI device node. 
 + 
 +```shell 
 +$ ls /dev/spidev1.0  
 +/dev/spidev1.0 
 +``` 
 +<tabbox VIM1S> 
 + 
 +Edit ''/boot/dtb/amlogic/kvim1s.dtb.overlay.env'' to add spi node to ''fdt_overlays'' node if it doesn't exist.
  
-<WRAP info > 
-For Overlays documentation, please refer to [[products:sbc:vim4:configurations:device-tree-overlay|Device Tree Overlay]]. 
-</WRAP> 
  
-SPI configures a loopback test device by default.+e.g. Enable ''SPI_A'', you need to add ''spi0'' to node ''fdt_overlays'' if it doesn't exist.
  
 ```shell ```shell
-$ ls /dev/spidev1.1 +fdt_overlays=spi0 
-/dev/spidev1.1+
 ``` ```
  
-===== Demo Source Code =====+After reboot, you will see the SPI device node.
  
-Get test code+```shell 
 +$ ls /dev/spidev1.0  
 +/dev/spidev1.0 
 +``` 
 + 
 +</tabbox> 
 + 
 +===== Disable SPI ===== 
 + 
 +If you want to use normal GPIO instead of SPI, you can remove the SPI node in [[products:sbc:common:configurations:device-tree-overlay|Device Tree Overlay]].  
 + 
 + 
 +===== Demo Source Code =====
  
 ```c spidev_test.c ```c spidev_test.c
Line 112: Line 149:
 } }
  
-static const char *device = "/dev/spidev1.1";+static const char *device = "/dev/spidev1.0";
 static uint32_t mode; static uint32_t mode;
 static uint8_t bits = 8; static uint8_t bits = 8;
Line 561: Line 598:
 ``` ```
  
-Compile test code+Compile test code:
  
 ```shell ```shell
Line 567: Line 604:
 ``` ```
  
-===== Demonstrate =====+===== Test demonstration =====
  
- +Prepare input text file:
-Prepare a TST text file.+
  
 ```shell ```shell
Line 576: Line 612:
 ``` ```
  
-Run ''spidev_test''.+Connect PIN36(MOSI), PIN37(MISO) then run ''spidev_test'':
  
 ```shell ```shell
Line 585: Line 621:
 ``` ```
  
-Check output data.+Check output data: 
 ```shell ```shell
 $ cat ./spi_out.txt $ cat ./spi_out.txt
 Amazing Khadas! Amazing Khadas!
 ``` ```
Last modified: 2023/11/07 05:07 by nick

Page Tools

Khadas Site

Khadas Community

Khadas GitHub

Khadas Downloads