Khadas Docs

Amazing Khadas, always amazes you!

User Tools

Site Tools


products:sbc:common:applications:gpio:pwm

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision
Previous revision
Last revision Both sides next revision
products:sbc:common:applications:gpio:pwm [2022/08/07 21:26]
olivia [VIM4]
products:sbc:common:applications:gpio:pwm [2023/12/25 22:00]
jacobe [Control PWM]
Line 3: Line 3:
 ===== Introduction ===== ===== Introduction =====
  
-This page mainly introduces the usage of hardware PWM, and leads you to control the hardware PWM on the [[products:sbc:common:applications:gpio:40pin-header|40-Pin Header]].+This page introduces the usage of hardware PWM, and leads you to control the hardware PWM on the [[products:sbc:common:applications:gpio:40pin-header|40-Pin Header]].
  
-===== PWM Information =====+===== PWM Reference Table =====
  
-          ^  PWM       ^  PIN  ^  GPIO Name  ^  GPIO Number  ^  DT Overlays Node   Device Node              ^ +        ^  PWM           ^  PIN  ^  GPIO name      ^  DT overlay node   Device node              ^ 
-^  VIM1     |  PWM_AO_A  |  35    GPIOAO_3   |  504          |  pwm_ao_a          |  /sys/class/pwm/pwmchip4 +^  VIM1   |  ''PWM_AO_A''   35   |  ''GPIOAO_3''   |  ''pwm_ao_a''     |  /sys/class/pwm/pwmchip4 
-^  VIM2     |  PWM_D      35    GPIODV_28  |  478          |  pwm_d             |  /sys/class/pwm/pwmchip1 +^  VIM2   |  ''PWM_D''     |  35   |  ''GPIODV_28''  |  ''pwm_d''        |  /sys/class/pwm/pwmchip1 
-^  VIM3/3L  |  PWM_F      35   |  GPIOX_7    |  432          |  pwm_f             |  /sys/class/pwm/pwmchip4 +^  VIM3   |  ''PWM_F''     |  35   |  ''GPIOH_5''    |  ''pwm_f''        |  /sys/class/pwm/pwmchip4 
-^  VIM4     |  PWM_F      35    GPIOY_8    |  482          |  pwm_f             |  /sys/class/pwm/pwmchip4  |+^  VIM3L  |  ''PWM_F''     |  35    ''GPIOH_5''    |  ''pwm_f''        | /sys/class/pwm/pwmchip0   | 
 +^  VIM4    ''PWM_F''     |  35   |  ''GPIOY_8''    |  ''pwm_f''        |  /sys/class/pwm/pwmchip4 
 +^  VIM1S  |  ''PWM_F''      35    ''GPIOZ_6''    |  ''pwm_f''        |  /sys/class/pwm/pwmchip0  |
  
-===== Enabel PWM =====+ 
 +===== Enable PWM =====
  
 In order to use the PWM, you need to enable the PWM function via [[products:sbc:common:configurations:device-tree-overlay|Device Tree Overlay]]. In order to use the PWM, you need to enable the PWM function via [[products:sbc:common:configurations:device-tree-overlay|Device Tree Overlay]].
  
-<tabbox VIM1/2/3/3L/Edge1>+<tabbox VIM1/2/3/Edge1>
  
 Edit ''/boot/env.txt'' to add the pwm node to ''overlays'' node if it doesn't exist. Edit ''/boot/env.txt'' to add the pwm node to ''overlays'' node if it doesn't exist.
Line 24: Line 27:
  
 ```shell ```shell
-overlays=uart4 pwm_ao_a pwm_f+overlays=uart3 pwm_f i2c3 i2s os08a10 watchdog
 ``` ```
  
-After the reboot, you will see the pwm device node.+After reboot, you will see the pwm device node.
  
 ```shell ```shell
Line 33: Line 36:
 device  export  npwm  power  subsystem  uevent  unexport device  export  npwm  power  subsystem  uevent  unexport
 ``` ```
 +
 +<tabbox VIM3L>
 +
 +Edit ''/boot/env.txt'' to add the pwm node to ''overlays'' node if it doesn't exist.
 +
 +Take VIM3L as an example to enable ''PWM_F'', you need to add ''pwm_f'' node to ''overlays'' node if it doesn't exist.
 +
 +```shell
 +overlays=uart3 pwm_f i2c3 i2s watchdog
 +```
 +
 +After reboot, you will see the pwm device node.
 +
 +```shell
 +$ ls /sys/class/pwm/pwmchip0
 +device  export  npwm  power  subsystem  uevent  unexport
 +```
 +
 +
 +<tabbox VIM3 with 5.15 kernel>
 +
 +Edit ''/boot/dtb/amlogic/kvim3.dtb.overlay.env'' to add pwm node to ''fdt_overlays'' node if it doesn't exist.
 +
 +
 +You need to add ''pwm_f'' to node ''fdt_overlays'' if it doesn't exist to enable ''PWM_F''.
 +
 +```shell
 +fdt_overlays=pwm_f
 +
 +```
 +
 +After reboot, you will see the pwm device node.
 +
 +<tabbox VIM3L with 5.15 kernel>
 +
 +Edit ''/boot/dtb/amlogic/kvim3l.dtb.overlay.env'' to add pwm node to ''fdt_overlays'' node if it doesn't exist.
 +
 +
 +You need to add ''pwm_f'' to node ''fdt_overlays'' if it doesn't exist to enable ''PWM_F''.
 +
 +```shell
 +fdt_overlays=pwm_f
 +
 +```
 +
 +After reboot, you will see the pwm device node.
  
 <tabbox VIM4> <tabbox VIM4>
Line 46: Line 95:
 ``` ```
  
-After the reboot, you will see the pwm device node.+After reboot, you will see the pwm device node.
  
 ```shell ```shell
Line 53: Line 102:
 ``` ```
  
-</tabbox>+<tabbox VIM1S>
  
-===== Disable PWM to Use GPIO =====+Edit ''/boot/dtb/amlogic/kvim1s.dtb.overlay.env'' to add pwm node to ''fdt_overlays'' node if it doesn't exist. 
 + 
 + 
 +You need to add ''pwm_f'' to node ''fdt_overlays'' if it doesn't exist to enable ''PWM_F''
 + 
 +```shell 
 +fdt_overlays=pwm_f 
 + 
 +``` 
 + 
 +After reboot, you will see the pwm device node. 
 + 
 +```shell 
 +$ ls /sys/class/pwm/pwmchip0 
 +device  export  npwm  power  subsystem  uevent  unexport 
 +``` 
 +</tabbox>
  
-If you want to use normal GPIO instead of PWM, you can remove the PWM node in device tree overlays configration file.  
  
 ===== Control PWM ===== ===== Control PWM =====
Line 63: Line 127:
 **Enable PWM:** **Enable PWM:**
  
-<tabbox VIM1/3/3L/4> +<tabbox VIM1/3/4> 
  
 ```shell ```shell
-echo 1 | sudo tee /sys/class/pwm/pwmchip4/export +echo 1 | sudo tee /sys/class/pwm/pwmchip4/export 
-echo 1000000 | sudo tee /sys/class/pwm/pwmchip4/pwm1/period +echo 1000000 | sudo tee /sys/class/pwm/pwmchip4/pwm1/period 
-echo 500000 | sudo tee /sys/class/pwm/pwmchip4/pwm1/duty_cycle +echo 500000 | sudo tee /sys/class/pwm/pwmchip4/pwm1/duty_cycle 
-echo 1 | sudo tee /sys/class/pwm/pwmchip4/pwm1/enable+echo 1 | sudo tee /sys/class/pwm/pwmchip4/pwm1/enable
 ``` ```
 +
 <tabbox VIM2>  <tabbox VIM2> 
  
 ```shell ```shell
-echo 1 | sudo tee /sys/class/pwm/pwmchip1/export +echo 1 | sudo tee /sys/class/pwm/pwmchip1/export 
-echo 1000000 | sudo tee /sys/class/pwm/pwmchip1/pwm1/period +echo 1000000 | sudo tee /sys/class/pwm/pwmchip1/pwm1/period 
-echo 500000 | sudo tee /sys/class/pwm/pwmchip1/pwm1/duty_cycle +echo 500000 | sudo tee /sys/class/pwm/pwmchip1/pwm1/duty_cycle 
-echo 1 | sudo tee /sys/class/pwm/pwmchip1/pwm1/enable+echo 1 | sudo tee /sys/class/pwm/pwmchip1/pwm1/enable 
 +``` 
 + 
 +<tabbox VIM3L/1S>  
 + 
 +```shell 
 +echo 1 | sudo tee /sys/class/pwm/pwmchip0/export 
 +echo 1000000 | sudo tee /sys/class/pwm/pwmchip0/pwm1/period 
 +echo 500000 | sudo tee /sys/class/pwm/pwmchip0/pwm1/duty_cycle 
 +echo 1 | sudo tee /sys/class/pwm/pwmchip0/pwm1/enable 
 +``` 
 + 
 +<tabbox VIM4/4N with 5.15 kernel>  
 + 
 +```shell 
 +echo 1 | sudo tee /sys/class/pwm/pwmchip12/export 
 +echo 1000000 | sudo tee /sys/class/pwm/pwmchip12/pwm1/period 
 +echo 500000 | sudo tee /sys/class/pwm/pwmchip12/pwm1/duty_cycle 
 +echo 1 | sudo tee /sys/class/pwm/pwmchip0/pwm12/enable
 ``` ```
  
Line 92: Line 175:
 **Disable PWM:** **Disable PWM:**
  
-<tabbox VIM1/3/3L/4> +<tabbox VIM1/3/4> 
 ```shell ```shell
-echo 0 | sudo tee /sys/class/pwm/pwmchip4/pwm1/enable+echo 0 | sudo tee /sys/class/pwm/pwmchip4/pwm1/enable
 ``` ```
 <tabbox VIM2>  <tabbox VIM2> 
 ```shell ```shell
-echo 0 | sudo tee /sys/class/pwm/pwmchip1/pwm1/enable+echo 0 | sudo tee /sys/class/pwm/pwmchip1/pwm1/enable 
 +``` 
 +<tabbox VIM3L/1S>  
 +```shell 
 +echo 0 | sudo tee /sys/class/pwm/pwmchip0/pwm1/enable
 ``` ```
 </tabbox> </tabbox>
 +
 +===== Disable PWM to Use GPIO =====
 +
 +If you want to use normal GPIO instead of PWM, you can remove the PWM node in [[products:sbc:common:configurations:device-tree-overlay|Device Tree Overlay]].
 +
  
  
Last modified: 2023/12/25 22:01 by jacobe