Khadas Docs

Amazing Khadas, always amazes you!

User Tools

Site Tools

Home / products / sbc / common / applications / gpio / led
products:sbc:common:applications:gpio:led

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
products:sbc:common:applications:gpio:led [2022/07/12 23:54]
nick [Table] 		products:sbc:common:applications:gpio:led [2026/05/11 02:23] (current)
nick
Line 4: Line 4:
 ===== Introduction ===== ===== Introduction =====
 /* /*
-This document mainly describes the onboard LEDs. You will learn how to control the LEDs.+This page mainly describes the onboard LEDs and leads you to control the LEDs.
 */ */
-Onboard LED indicators usage under Linux . You will learn how to control the LEDs. +This page introduces the usage of Onboard LED indicators under Linux, and leads you to control the LEDs. 
  
-===== LED Information =====+===== Device LED configurations =====
  
-|           ^  Device Node              ^ +^  Device      ^  Node name                  ^  LED color  ^ 
-^  VIM1/2   |  /sys/class/leds/sys_led  | +^  VIM1/2      |  /sys/class/leds/sys_led    |  White      | 
-^  VIM3/3L  |  /sys/class/leds/red_led  | +^  VIM3/3L     |  /sys/class/leds/red_led    |  Red        | 
-^ :::       |  /sys/class/leds/sys_led  | +|  :::         |  /sys/class/leds/sys_led    |             | 
-^  VIM4     |  /sys/class/leds/pwmled   | +^  VIM1S/VIM4  |  /sys/class/leds/pwmled     |             | 
-^  Edge1    |  /sys/class/leds/red_led  | +^  Edge1       |  /sys/class/leds/red_led    |             | 
-| :::       |  /sys/class/leds/sys_led  |+|  :::         |  /sys/class/leds/sys_led    |             | 
 +^  Edge2/Edge-2L  |  /sys/class/leds/red_led    |  Red        | 
 +|  :::         |  /sys/class/leds/green_led  |  Green      | 
 +|  :::         |  /sys/class/leds/blue_led   |  Blue       |
  
  
 +===== Setup LED =====
  
-<tabbox VIM1/2>+<tabbox VIM1/2/3/3L>
  
-VIM1/VIM2 has only one node.+We will take ''sys_led'' (white) as an example.
  
-```shell +**Turn off**
-$ ls /sys/class/leds +
-sys_led +
-```+
  
-<tabbox VIM3/3L> +Set the LED node parameter to ''none'' to turn off the LED:
- +
-VIM3/VIM3L has two nodes.+
  
 ```shell ```shell
-$ ls /sys/class/leds +$ echo none | sudo tee /sys/class/leds/sys_led/trigger
-red_led  sys_led+
 ``` ```
  
-<tabbox VIM4>+**Turn on**
  
-VIM4 has only one node which is a PWM LED.+Set the LED node parameter to ''default-on'' to keep the LED permanently on:
  
 ```shell ```shell
-$ ls /sys/class/leds +$ echo default-on | sudo tee /sys/class/leds/sys_led/trigger
-pwmled+
 ``` ```
  
-<tabbox Edge1>+**Set LED heartbeat**
  
-Edge1 has two nodes.+Set the LED node parameter to ''heartbeat'', to make the LED flash with a heartbeat blink:
  
 ```shell ```shell
-$ ls /sys/class/leds +$ echo heartbeat | sudo tee /sys/class/leds/sys_led/trigger
-read_led  sys_led+
 ``` ```
-<tabbox Edge2> 
  
-</tabbox>+You can also experiment with other parameters.
  
-===== Setup LED =====+<tabbox VIM1S/VIM4>
  
-<tabbox VIM1/2/3/3L> +We will take ''pwmled'' (white) as an example.
- +
-We will take ''sys_led'' (white) as an example.+
  
 **Turn off** **Turn off**
Line 70: Line 63:
  
 ```shell ```shell
-$ echo none | sudo tee /sys/class/leds/sys_led/trigger+$ echo none | sudo tee /sys/class/leds/pwmled/trigger
 ``` ```
  
 **Turn on** **Turn on**
  
-Set the LED node parameter to ''default-on'' to keep the LED permanently on:+Set the LED node parameter to ''default-on'', to make the LED permanently on:
  
 ```shell ```shell
-$ echo default-on | sudo tee /sys/class/leds/sys_led/trigger+$ echo default-on | sudo tee /sys/class/leds/pwmled/trigger
 ``` ```
 +
  
 **Set LED heartbeat** **Set LED heartbeat**
Line 86: Line 80:
  
 ```shell ```shell
-$ echo heartbeat > /sys/class/leds/sys_led/trigger+$ echo heartbeat | sudo tee /sys/class/leds/pwmled/trigger
 ``` ```
  
-You can also try other parameters.+You can also experiment with other parameters.
  
-<tabbox VIM4>+<tabbox Edge1>
  
-We will take ''pwmled'' (white) as an example.+We will use ''sys_led'' as an example:
  
 **Turn off** **Turn off**
Line 100: Line 94:
  
 ```shell ```shell
-$ echo none | sudo tee /sys/class/leds/pwmled/trigger+$ echo none | sudo tee /sys/class/leds/sys_led/trigger
 ``` ```
  
 **Turn on** **Turn on**
  
-Set the LED node parameter to ''default-on'', to make the LED permanently on:+Set the LED node parameter to ''default-on'' to keep the LED permanently on:
  
 ```shell ```shell
-$ echo default-on | sudo tee /sys/class/leds/pwmled/trigger+$ echo default-on | sudo tee /sys/class/leds/sys_led/trigger
 ``` ```
- 
- 
 **Set LED heartbeat** **Set LED heartbeat**
  
Line 117: Line 109:
  
 ```shell ```shell
-$ echo heartbeat > /sys/class/leds/pwmled/trigger+$ echo heartbeat | sudo tee /sys/class/leds/sys_led/trigger
 ``` ```
  
 You can also experiment with other parameters. You can also experiment with other parameters.
  
-<tabbox Edge1> +<tabbox Edge2/Edge-2L> 
- +We will use ''red_led'' as an example:
-We will use sys_led as an example:+
  
 **Turn off** **Turn off**
Line 131: Line 122:
  
 ```shell ```shell
-$ echo none | sudo tee /sys/class/leds/sys_led/trigger+$ echo none | sudo tee /sys/class/leds/red_led/trigger
 ``` ```
  
Line 139: Line 130:
  
 ```shell ```shell
-$ echo default-on | sudo tee /sys/class/leds/sys_led/trigger+$ echo default-on | sudo tee /sys/class/leds/red_led/trigger
 ``` ```
 **Set LED heartbeat** **Set LED heartbeat**
Line 146: Line 137:
  
 ```shell ```shell
-$ echo heartbeat > /sys/class/leds/sys_led/trigger+$ echo heartbeat | sudo tee /sys/class/leds/red_led/trigger
 ``` ```
 +The others are similar. 
 + 
 You can also experiment with other parameters. You can also experiment with other parameters.
- 
-<tabbox Edge2> 
  
 </tabbox> </tabbox>
Last modified: 2022/07/12 23:54 by nick

Page Tools

Khadas Site

Khadas Community

Khadas GitHub

Khadas Downloads