Khadas Docs

Amazing Khadas, always amazes you!

User Tools

Site Tools

Home / products / sbc / common / applications / gpio / 1wire
products:sbc:common:applications:gpio:1wire

Differences

This shows you the differences between two versions of the page.

Link to this comparison view

Both sides previous revision Previous revision
Next revision 		Previous revision
products:sbc:common:applications:gpio:1wire [2022/07/12 23:30]
nick 		products:sbc:common:applications:gpio:1wire [2023/11/07 04:59] (current)
nick old revision restored (2023/11/07 04:42)
Line 3: Line 3:
 ===== Introduction ===== ===== Introduction =====
  
-This document mainly introduces the usage of 1-Wire bus on [[products:sbc:common:applications:gpio:40pin-header|40-Pin Header]].+This page introduces the usage of 1-Wire bus on [[products:sbc:common:applications:gpio:40pin-header|40-Pin Header]].
  
 ===== 1-Wire Information ===== ===== 1-Wire Information =====
  
 +You can find the default PIN used for ''1-Wire'' bus from the table below.
  
- +|           ^  PIN  ^  GPIO Name  ^  DT Overlays Node  ^  Device Node          ^ 
-|           ^  PIN  ^  PIN & GPIO(#number)  ^  DT Overlays Node  ^  Device Node          ^ +^  VIM1/2   |  37   |  GPIOH_5    |  onewire           |  /sys/bus/w1/devices  | 
-^  VIM1/2   |  37   |  GPIOH_5(#421)        |  onewire           |  /sys/bus/w1/devices  | +^  VIM3/3L  |  15   |  GPIOH_6    | :::                | :::                   | 
-^  VIM3/3L  |  15   |  GPIOH_6(#433)        |  onewire           |  :::                  | +^  VIM4     |  37   |  GPIOT_19   | :::                | :::                   | 
-^  VIM4     |       |                       |  onewire           |  :::                  |+^  VIM1S    |  36   |  GPIOZ_8    | :::                | :::                   | 
 +^  Edge1    |  30   |  GPIO4_A0   | :::                | :::                   | 
 +|           |       |             | :::                | :::                   |
  
 ===== Enable 1-Wire Bus ===== ===== Enable 1-Wire Bus =====
  
-You can enable 1-Wire bus via [[products:sbc:common:configurations:device-tree-overlay|Device Tree Overlay]].+In order to use the 1-Wire, you need to enable the ''1-Wire'' function via [[products:sbc:common:configurations:device-tree-overlay|Device Tree Overlay]].
  
 <tabbox VIM1/2/3/3L/Edge1> <tabbox VIM1/2/3/3L/Edge1>
  
-Edit ''/boot/env.txt'' to add ''onewire'' to ''overlays'' node.+Edit ''/boot/env.txt'' to add the onewire node to ''overlays'' node if it doesn't exist. 
 + 
 +Take VIM3 as an example to enable ''1-Wire'', you need to add ''onewire'' node to ''overlays'' node if it doesn't exist.
  
-e.g. 
 ```shell ```shell
-overlays=uart4 pwm_ao_a pwm_f i2c0 onewire+overlays=onewire
 ``` ```
 +<tabbox VIM3 with 5.15 kernel>
 +
 +Edit ''/boot/dtb/amlogic/kvim3.dtb.overlay.env'' to add onewire node to ''fdt_overlays'' node if it doesn't exist.
 +
 +
 +e.g. To enable onewire, you need to add ''onewire'' to node ''fdt_overlays'' if it doesn't exist.
 +
 +```shell
 +fdt_overlays=onewire
 +
 +```
 +
 +<tabbox VIM3L with 5.15 kernel>
 +
 +Edit ''/boot/dtb/amlogic/kvim3l.dtb.overlay.env'' to add onewire node to ''fdt_overlays'' node if it doesn't exist.
 +
 +
 +e.g. To enable onewire, you need to add ''onewire'' to node ''fdt_overlays'' if it doesn't exist.
 +
 +```shell
 +fdt_overlays=onewire
 +
 +```
 +
 <tabbox VIM4> <tabbox VIM4>
  
-Edit ''/boot/dtb/amlogic/kvim4.dtb.overlay.env'' to add ''onewire'' to ''fdt_overlays'' node.+Edit ''/boot/dtb/amlogic/kvim4.dtb.overlay.env'' to add onewire node to ''fdt_overlays'' node if it doesn't exist.
  
-e.g. + 
 +e.g. To enable onewire, you need to add ''onewire'' to node ''fdt_overlays'' if it doesn't exist.
  
 ```shell ```shell
Line 36: Line 65:
  
 ``` ```
 +<tabbox VIM1S>
  
 +Edit ''/boot/dtb/amlogic/kvim1s.dtb.overlay.env'' to add onewire node to ''fdt_overlays'' node if it doesn't exist.
 +
 +
 +e.g. To enable onewire, you need to add ''onewire'' to node ''fdt_overlays'' if it doesn't exist.
 +
 +```shell
 +fdt_overlays=onewire
 +
 +```
 </tabbox> </tabbox>
  
 <WRAP tip > <WRAP tip >
-Reboot to effect.+Reboot the system for this change to take effect.
 </WRAP> </WRAP>
  
Line 69: Line 108:
 ``` ```
  
-Physical pins of 1-Wire bus: + 
-<tabbox VIM1/2>  +===== Disable 1-Wire to Use GPIO ===== 
-''GPIOH_5'' - PIN37 + 
-<tabbox VIM3/3L>  +If you want to use normal GPIO instead of 1-Wire, you can remove the 1-Wire node in [[products:sbc:common:configurations:device-tree-overlay|Device Tree Overlay]]. 
-''GPIOH_6'' - PIN15 +
-<tabbox VIM4>  +
-''GPIOT_19'' - PIN37 +
-<tabbox Edge1> +
-''GPIO4_A0'' - PIN30 +
-</tabbox>+
Last modified: 2022/07/12 23:30 by nick

Page Tools

Khadas Site

Khadas Community

Khadas GitHub

Khadas Downloads