This is an old revision of the document!
This page will introduce the use of 5G modules.You will learn how to use the 5G module on Khadas SBC with dial-up Internet access tools.
Clone the source code form our Github
Paste the following text into the command line, you can get the dialing tool source code.
$ git clone https://github.com/numbqq/quectel-CM.git
Compile the dialing tool source code
$ cd quectel-CM $ make
Dial up Internet access
$ sudo ./quectel-CM &
Confirm the network interface IP
$ ifconfig rmnet_mhi0.1
rmnet_mhi0.1 Link encap:UNSPEC HWaddr 02-50-F4-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.129.59.93 Mask:255.255.255.252
inet6 addr: fe80::50:f4ff:fe00:0/64 Scope:Link
UP RUNNING NOARP MTU:1500 Metric:1
RX packets:1089360 errors:0 dropped:0 overruns:0 frame:0
TX packets:176581 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1521449058 (1.4 GiB) TX bytes:57525792 (54.8 MiB)
Set dns
$ echo "nameserver 1.0.0.1" | sudo tee /etc/resolv.conf
You can use the following command text to test the results of the above settings.
$ ping -I rmnet_mhi0.1 khadas.com