This is an old revision of the document!
This page will introduce the use of 5G modules.You will learn how to use 5G modules on Khadas SBC.
1.Clone the source code form our Github
Paste the following text into the command line, you can get the dialing tool source code.
$ git clone https://github.com/numbqq/quectel-CM.git
2.Compile the dialing tool source code
$ cd quectel-CM $ make
3.Dial up Internet access
$ sudo ./quectel-CM &
1. Confirm the network interface IP
$ ifconfig rmnet_mhi0.1
rmnet_mhi0.1 Link encap:UNSPEC HWaddr 02-50-F4-00-00-00-00-00-00-00-00-00-00-00-00-00
inet addr:10.129.59.93 Mask:255.255.255.252
inet6 addr: fe80::50:f4ff:fe00:0/64 Scope:Link
UP RUNNING NOARP MTU:1500 Metric:1
RX packets:1089360 errors:0 dropped:0 overruns:0 frame:0
TX packets:176581 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1521449058 (1.4 GiB) TX bytes:57525792 (54.8 MiB)
2.Set dns
$ echo "nameserver 1.0.0.1" | sudo tee /etc/resolv.conf
You can use the following command text to test the results of the above settings.
$ ping -I rmnet_mhi0.1 khadas.com