Differences

This shows you the differences between two versions of the page.

--- products:sbc:common:add-ons:5g-module-usage [2023/04/10 06:34]
ivan
+++ products:sbc:common:add-ons:5g-module-usage [2025/03/05 05:06] (current)
nick
@@ Line 4: / Line 4: @@
 This page will introduce the usage of [[https://www.khadas.com/product-page/5g-nr-module | RM500Q 5G NR module]].You will learn how to use the 5G module on Khadas SBC.
+<WRAP tip >
+AT command node is ''/dev/ttyUSB2''.
+</WRAP>
 ===== Preparation =====
   * Disconnect the Khadas SBC power port cable.
-  * Insert the 5G module board into the M.2 slot on [[https://www.khadas.com/product-page/new-m2x-extension | M2X WWAN Extension]] board.
+  * Insert the 5G module board into the M.2 slot on [[https://www.khadas.com/product-page/m2x-wwan-extension | M2X WWAN Extension]] board.
   * Insert the M2X WWAN Extension board into the SBC.
   * Insert a valid ''Nano SIM'' card on the 5G module.
@@ Line 18: / Line 23: @@
 You need to [[products:sbc:common:configurations:upgrade-system|]] to latest version.
-=== Switch a PCIe/USB3.0 port ===
+=== Enable PCIe Port (VIM3 Only) ===
+<WRAP important >
+If you use the VIM3 board, you need to enable the PCIe function.
+</WRAP>
 Khadas VIM3 PCIe/USB3.0 share one data port,and the default mode is USB 3.0.So when we need to use 5G module, we need to switch it to PCIe port.

Khadas Docs