|1||USB-A||USB 2.0 speed, 500mA max output|
|2||RJ-45||Gigabit Ethernet with Wake-On-LAN (WOL)|
|3||HDMI||HDMI 2.0a with CEC, 4K@60Hz|
|4||USB-C||USB 2.0 OTG and 5V power input, can be used for upgrading the OS|
|5||USB-A||USB 2.0 speed, 900mA max output|
|6||Current Limit Switch||Prevents damage to VIM2 during uneven loading conditions|
|7||Fan Header||4-wire fan header utilising pulse width modulation|
|8||Reset Button||Force reboot your VIM2 in the event of a system freeze|
|9||Function Button||Press this 3 times in 2 seconds to enter MaskROM mode|
|A||Power Button||This button turns on your VIM2|
|B||M2x4 Mounting Point||For mounting to cases and heatsinks|
|C||RTC Battery Header||Header for attaching a battery for the real time clock|
|D||40-Pin GPIO||Learn how to access the GPIO from here, or use it to add a Toneboard|
|E||Infrared Module||2-channel infrared receiver for use with Khadas IR remote|
|F||LEDs||Status indicator LEDs|
|G||FPC Connector||10-pins, 0.5mm pitch, with I2C, IOs|
|H||I-Pex Wi-Fi / Bluetooth] Connector||Wi-Fi / BT Antenna connector|
|I||I-Pex Wi-Fi / Bluetooth] Connector||Wi-Fi / BT Antenna connector|
|1||Pogo Pads||External 5V power input, can be provided by vTV Board (DVB Tuner)|
|2||Micro-SD Card Slot||for extra storage|
|3||500mA Fuse||Fuse for the 500mA USB port|
|4||WOL Switch||Power switch activated via Wake-On-LAN|
|5||MCU||STM8S003 micro-controller with programmable EEPROM|
|6||MCU Pogo Pads||SWIM, UART, ADC, NRST|
|7||SPI Flash||Flash memory module that interfaces over SPI|
|8||20-Pin Pogo Pads||USB, I2C, DVB-Bus, IOs, for docking with the vTV Board (DVB Tuner)|
|9||XPWR Pads||Connect an external power switch using these pads|
|A||900mA Fuse||Fuse for the 900mA USB port|
|Blue||OFF||Power source disconnected|
|Solid ON||Power source connected, SBC turned off|
|White||OFF||SBC turned off|
|Solid ON||SBC turned on|
The above behaviours are default out-of-the-box, and can be altered by a user. For example the white LED can be made to blink or breathe. For more information on how to program them via your favourite OS (each OS is different), please consult with experts at forum.khadas.com.
Khadas has recently upgraded their VIM2 to v1.4 which features several improvements, such as the addition of XPWR pads for an external power switch, as well as a larger 16MB SPI-flash.
It also has had several components moved / upgraded to accomodate a quieter cooling system:
- Khadas Website - VIM2 v1.4 Description
- Khadas Website - VIM2 v1.4 Accessories
- Khadas Shop - VIM2 v1.4 Page
- Khadas Files - VIM2 v1.4 Specifications Sheet
- Distributor Guide - What’s New In VIM2 v1.4
Although your VIM2 SBC is compatible with various types of power supplies, these are the recommended specs for the best performance-output and stability.
- 5V, 2000mA Power Adapter
- USB-A to USB-C Cable
- Khadas Shop - Power Adapter
- Khadas Shop - USB-C Cable
- Extra Power Input For Khadas VIMs
- Khadas VIM Specifications
These items are useful when you need to connect your VIM2 SBC to an external display + keyboard mouse + remote control, for use as a desktop computer or media center.
- 4K HDMI 2.0 Cable
- HDMI-Compatible 1080P/4K Monitor
- Wireless USB Keyboard + Mouse
- CEC-Compatible Remote Control
Note: Please do not attach multiple cables with large heads that interfere with each other, as that may bend or twist the connectors, and this will cause intermittent connectivity issues after some time.
You’ll need these items if you want to use your laptop or desktop PC to upgrade your VIM2 SBC’s operating system stored in its eMMC storage. For example, changing the bootup operating system from Android to Ubuntu, or installing a more exotic 3rd-party OS.
- USB-A to USB-C Data Cable (Legacy Computers)
- USB-C to USB-C Data Cable (Modern Computers)
- Laptop / Desktop PC
These items are useful if you wish to use your VIM2 SBC as a media center, for storing/downloading large movie files. A microSDXC UHS-I card is expensive, but its also fast enough for 4K video playback. In addition, you can connect external USB-2.0/3.0 SSDs or HDDs for storage that can encompass your entire media library.
- 64GB or larger, USB-2.0/3.0 HDD / SSD
- 64GB or larger, microSDXC UHS-I SD-Card
Extreme cases of crash-recovery will require you to use the MRegister to reset your VIM2 SBC. A USB Serial Debug Tool is also useful for developers debugging complex software issues.
- Your fingers (for resetting a dead SBC via Khadas-TST, VIM2 V14 only)
- Conductive Metal Tweezers (For resetting a dead SBC via MRegister)
- USB Serial Debug Tool (For diagnosing software/hardware issues)
- Khadas TST Upgrade Mode
- MRegister Upgrade Mode
- Amazon - Metal Tweezers
- Amazon - USB Serial Debug Tool
For more information, please see our website, read more documentation, or visit our forum.