VIM1 Beginners Guide

VIM1

image

Component Purpose
1 USB-A USB 2.0 speed, 500mA max output
2 RJ-45 10/100 Mbps Ethernet
3 HDMI HDMI 2.0b with 3D, HDR, CEC and HDCP 2.2
4 USB-C USB 2.0 OTG and 5V power input, can be used for upgrading the OS
5 USB-A USB 2.0 speed, 900mA max output
6 Fan Header 4-wire fan header utilising pulse width modulation
7 Reset Button Force reboot your VIM1 in the event of a system freeze
8 Function Button Press this 3 times in 2 seconds to enter MaskROM mode
9 Power Button This button turns on your VIM1
A M2x4 Mounting Point For mounting to cases and heatsinks
B RTC Battery Header Header for attaching a battery for the real time clock
C 40-Pin GPIO Learn how to access the GPIO from here, or use it to add a Toneboard
D Infrared Module 2-channel infrared receiver for use with Khadas IR remote
E LEDs Status indicator LEDs
F I-Pex Wi-Fi / Bluetooth Connector Wi-Fi / BT Antenna connector
Component Purpose
1 VIN 5V power input
2 Micro-SD Card Slot Boot alternative OSes via a Micro-SD card, and for extra storage
3 M-Register Allows the EMMC to enter MaskROM mode
4 XPWR Pads Connect an external power switch using these pads
Reset Function Power Purpose
x Force Reboot VIM1
x Enter Upgrade Mode (TST)
x Power On/Wake Up VIM1
x x Enter Upgrade Mode (KEYS)
x x x Erase EMMC
Colour Behaviour Meaning
Blue OFF Power source disconnected
Solid ON Power source connected, SBC turned off
White OFF SBC turned off
Solid ON SBC turned on
Red None None

The above behaviours are default out-of-the-box, and can be altered by a user. For example the white LED can be made to blink or breathe. For more information on how to program them via your favourite OS (each OS is different), please consult with experts at forum.khadas.com.

Image of Vim GPIO

Notice
  • PIN17-20: for UART debugging
  • PIN29-33: iomux for I2S
  • PIN36 : 32.768KHz clock output
  • PIN38 : enable signal for whole system power

VIM1 Power Supply

Although your VIM1 SBC is compatible with various types of power supplies, these are the recommended specs for the best performance-output and stability.

  1. 5V, 2000mA Power Adapter
  2. USB-A to USB-C Cable

Learn More:

Displays & User Input

These items are useful when you need to connect your VIM1 SBC to an external display + keyboard mouse + remote control, for use as a desktop computer or media center.

  1. 4K HDMI 2.0 Cable
  2. HDMI-Compatible 1080P/4K Monitor
  3. Wireless USB Keyboard + Mouse
  4. CeC-Compatible Remote Control
Note

Please do not attach multiple cables with large heads that interfere with each other, as that may bend or twist the connectors, and this will cause intermittent connectivity issues after some time.

Learn More:

Upgrading eMMC Operating System Using USB-Cable

You’ll need these items if you want to use your laptop or desktop PC to upgrade your VIM1 SBC’s operating system stored in its eMMC storage. For example, changing the bootup operating system from Android to Ubuntu, or installing a more exotic 3rd-party OS.

  1. USB-A to USB-C Data Cable (Legacy Computers)
  2. USB-C to USB-C Data Cable (Modern Computers)
  3. Laptop / Desktop PC

Learn More:

Firmware Images:

Software Development / Advanced Crash Recovery

Extreme cases of crash-recovery will require you to use the MRegister to reset your VIM1 SBC. A USB Serial Debug Tool is also useful for developers debugging complex software issues.

  1. Conductive Metal Tweezers (For resetting a dead SBC via MRegister)
  2. USB Serial Debug Tool (For diagnosing software/hardware issues)

Learn More:

VIM1 Website

For more information, please see our website, read more documentation, or visit our forum.

VIM1 Review Video