Edge2 Interfaces

Top side

	Component	Purpose
1	USB-A	USB 3.1, blue colour
2	USB-C	USB 3.1 & Display Port
3	HDMI	Type-A Female, up to 8K@60Hz, HDCP 2.3
4	USB-C	Only for power delivery
5	USB-A	USB 2.0, black colour
6	RGB LED1	Status indicator LED
7	RTC Battery	RTC battery for the real time clock
8	Reset Button	Force reboot your Edge2
9	Function Button	Press this 3 times in 2 seconds to enter MaskROM mode
A	Power Button	This button turns on your Edge2
B	Digital Microphone	Right digital microphone
C	Camera3	30-pin, 0.5mm pitch, 4-lane, dual cameras, 16MP 30FPS image signal processing
D	Camera2	30-pin, 0.5mm pitch, 4-lane, dual cameras, 16MP 30FPS image signal processing
E	Camera1	30-pin, 0.5mm pitch, 4-lane, dual cameras, 16MP 30FPS image signal processing
F	Digital Microphone	Left digital microphone
G	G-Sensor	3-axis accelerometer
H	MHF4 Antenna	Wi-Fi and Bluetooth antenna connector
I	SPI Flash	Flash memory module that interfaces over SPI
J	PWM Fan Header	4-wire fan header utilising pulse width modulation
K	RGB LED2	Status indicator LED

	Component	Purpose
1	Pogo pins	Debug and USB hub pads
2	DSI2	30-pin, 0.5mm pitch, provided data path for dual
3	DSI1	40-pin, 0.5mm pitch FPC connector for 4-lane 1080P displays && TP touch input
4	IO2	30-pin, 0.5mm pitch,connect the expansion board
5	IO1	30-pin, 0.5mm pitch, connect the expansion board
6	XPWR pads	Extennal POWER key pads

Reset	Function	Power	Purpose
x			Force Reboot Edge-V
	x		Enter Upgrade Mode (TST)
		x	Power On/Wake Up Edge2
x		x	Enter Upgrade Mode (KEYS)