====== VIM1 Install OS into eMMC on Windows ======

===== Introduction =====

This document mainly introduces how to use the burning tool to burn the system to Khadas SBC under Windows.

===== Preparation =====

Download the [[dl>/Tools/USB_Burning_Tool_v2.2.0.zip|USB Burning Tool]] and extract it to somewhere.

===== Install =====

Run ''setup_v2.x.x.exe'' to install the tool.

===== Flash Image =====

  * Open ''USB_Burning_tool_v2.x.x.exe'', click ''File''-->''Import Image'' to choose an [[dl>/Firmware/|OS image]] for your board.
  * Connect your board to your PC with a USB-C data cable (the board will power on automatically).
  * Put your board into [[/products/sbc/vim1/install-os/boot-into-upgrade-mode|Upgrade Mode]].
  * If you have performed steps 2 and 3 correctly, your PC will automatically discover your board as an attached USB-device.
  * Now all you need to do is to click the ''Start'' button and wait for burning to complete.

{{/products:sbc:vim1:install-os:usb-upgrade-tool-interface-v217-en.png?800}}

<WRAP info >
  * To interrupt burning, click the Stop button, then close the USB Upgrade Tool. Note that the eMMC may already have been completely erased if you went past the 15% mark.
  * An [[/products/sbc/vim1/hardware/external-power-supply|External Power Supply]] may be required in cases where your PC cannot provide enough electrical power for the burning process.
</WRAP>